cbb/Motor_v2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
fccb93dd414af34b91116d72c6b6677b91e8f10f
Motor_v2/Robot_V2/device/Can.cpp
T
cbb fccb93dd41 feat(can): 添加OTA功能实现AB分区 
- 添加新的CANFD消息ID处理，支持OTA请求响应
- 实现OTA状态检查和ACK发送功能
- 优化CAN_transmiter类方法声明格式

refactor(flash): 重构OTA设置和应用数据移动功能

- 修改OTA_SET函数参数类型从bool到u32
- 优化move_app_data函数实现，添加CRC校验和错误处理
- 添加调试输出信息和看门狗喂狗机制
- 修复数据移动过程中的地址计算错误

refactor(config): 优化Flash分区配置和常量定义

- 重新组织Flash分区地址常量定义
- 添加OTA相关CANFD消息ID定义
- 移动CANFD相关常量到合适位置

docs(flash): 更新函数注释和文档说明

- 更新move_app_data函数的注释说明
- 添加代码注释以提高可读性

fix(initial): 修复OTA初始化和看门狗配置

- 将看门狗初始化移到main函数中合适位置
- 修正OTA初始化逻辑
- 添加CAN模块外部引用
2026-01-05 00:55:00 +08:00

865 lines
27 KiB
C++
Raw Blame History

#include "Can.h"
#include "FOC.h"
#include "Filter.h"
#include "adc.h"
#include "ang_sensor.h"
#include "config.h"
#include "flash.h"
#include "gd32c10x.h"
#include "gd32c10x_can.h"
#include "gd32c10x_dma.h"
#include "gd32c10x_gpio.h"
#include "motor.h"
#include "systick.h"
#include <cstdio>
#include <cstdlib>
#include <cstring>
#include <random>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
constexpr u16 CANX = CAN0;
CAN_transmiter CAN0_transmiter; // CAN初始化
extern FOC_Controlroller FOC;
extern sampler sampler;
extern angle_sensor KTH7823;
extern EncoderAngleKalman Angle_kalman; // 角度滤波
extern EncoderVelocityKalman Vel_kalman; // 速度滤波
extern FlashEEPROM flashEEP;
// 添加DMA相关变量
dma_parameter_struct dma_rx_parameter;
dma_parameter_struct dma_tx_parameter;
uint8_t can_rx_buffer[8]; // CAN接收缓冲区
uint8_t can_tx_buffer[8]; // CAN发送缓冲区
/*!
\brief initialize CAN GPIO
\param[in] none
\param[out] none
\retval ErrStatus: SUCCESS or ERROR
*/
u8 can_gpio_init() {
/* enable CAN clock */
rcu_periph_clock_enable(RCU_CAN0);
rcu_periph_clock_enable(RCU_GPIOB);
rcu_periph_clock_enable(RCU_AF);
/* configure CAN0 GPIO */
gpio_init(GPIOB, GPIO_MODE_IPU, GPIO_OSPEED_50MHZ, GPIO_PIN_8); // rx
gpio_init(GPIOB, GPIO_MODE_AF_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_9); // tx
gpio_pin_remap_config(GPIO_CAN0_PARTIAL_REMAP, ENABLE);
/* enable the EN GPIO clock */
gpio_init(GPIOB, GPIO_MODE_OUT_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_13);
gpio_bit_reset(GPIOB, GPIO_PIN_13);
return 0;
}
/*!
\brief 初始化CAN DMA
\param[in] none
\param[out] none
\retval none
*/
void can_dma_init(void) {
// 使能DMA时钟
rcu_periph_clock_enable(RCU_DMA0);
// 配置接收DMA
dma_struct_para_init(&dma_rx_parameter);
dma_rx_parameter.periph_addr =
(uint32_t)(&CAN_RFIFOMDATA0(CAN0, CAN_FIFO0)); // CAN接收数据寄存器地址
dma_rx_parameter.memory_addr = (uint32_t)can_rx_buffer; // 接收缓冲区地址
dma_rx_parameter.direction = DMA_PERIPHERAL_TO_MEMORY; // 外设到内存
dma_rx_parameter.memory_width = DMA_MEMORY_WIDTH_8BIT; // 内存宽度8位
dma_rx_parameter.periph_width = DMA_PERIPHERAL_WIDTH_8BIT; // 外设宽度8位
dma_rx_parameter.priority = DMA_PRIORITY_HIGH; // 高优先级
dma_rx_parameter.number = 8; // 传输字节数
dma_rx_parameter.periph_inc = DMA_PERIPH_INCREASE_DISABLE; // 外设地址不递增
dma_rx_parameter.memory_inc = DMA_MEMORY_INCREASE_ENABLE; // 内存地址递增
dma_init(DMA0, DMA_CH4, &dma_rx_parameter); // 使用DMA通道4
// 配置发送DMA
dma_struct_para_init(&dma_tx_parameter);
dma_tx_parameter.periph_addr =
(uint32_t)(&CAN_TMI0(CAN0)); // CAN发送数据寄存器地址
dma_tx_parameter.memory_addr = (uint32_t)can_tx_buffer; // 发送缓冲区地址
dma_tx_parameter.direction = DMA_MEMORY_TO_PERIPHERAL; // 内存到外设
dma_tx_parameter.memory_width = DMA_MEMORY_WIDTH_8BIT; // 内存宽度8位
dma_tx_parameter.periph_width = DMA_PERIPHERAL_WIDTH_8BIT; // 外设宽度8位
dma_tx_parameter.priority = DMA_PRIORITY_HIGH; // 高优先级
dma_tx_parameter.number = 8; // 传输字节数
dma_tx_parameter.periph_inc = DMA_PERIPH_INCREASE_DISABLE; // 外设地址不递增
dma_tx_parameter.memory_inc = DMA_MEMORY_INCREASE_ENABLE; // 内存地址递增
dma_init(DMA0, DMA_CH5, &dma_tx_parameter); // 使用DMA通道5
// 使能DMA通道
dma_channel_enable(DMA0, DMA_CH4);
dma_channel_enable(DMA0, DMA_CH5);
// 使能CAN接收DMA
// can_dma_enable(CAN0, CAN_DMA_RECEIVE);
}
/*!
\brief 初始化CAN0 2.0B 模式
\param[in] none
\param[out] none
\retval none
*/
void can_config(void) {
can_gpio_init();
can_dma_init(); // 初始化DMA
can_parameter_struct can_parameter;
can_filter_parameter_struct can_filter;
can_struct_para_init(CAN_INIT_STRUCT, &can_parameter);
/* initialize CAN register */
can_deinit(CAN0);
/* initialize CAN parameters */
can_parameter.time_triggered = DISABLE;
can_parameter.auto_bus_off_recovery = DISABLE;
can_parameter.auto_wake_up = DISABLE;
can_parameter.auto_retrans = DISABLE;
can_parameter.rec_fifo_overwrite = DISABLE;
can_parameter.trans_fifo_order = DISABLE;
can_parameter.working_mode = CAN_NORMAL_MODE;
/* configure CAN0 baud rate 1MBps, sample point at 80% */
can_parameter.resync_jump_width = CAN_BT_SJW_1TQ;
can_parameter.time_segment_1 = CAN_BT_BS1_7TQ;
can_parameter.time_segment_2 = CAN_BT_BS2_2TQ;
can_parameter.prescaler = 6;
/* initialize CAN */
if (can_init(CAN0, &can_parameter) != SUCCESS) {
while (1)
printf("can init error \r\n");
}
/* initialize filter */
/* configure filter mode */
can_filter.filter_mode = CAN_FILTERMODE_MASK;
can_filter.filter_bits = CAN_FILTERBITS_32BIT;
/* configure filter mask */
can_filter.filter_mask_high = 0x0000;
can_filter.filter_mask_low = 0x0000;
/* select receiver fifo */
can_filter.filter_fifo_number = CAN_FIFO0;
can_filter.filter_enable = ENABLE;
/* configure filter number */
can_filter.filter_number = 0;
can_filter_init(&can_filter);
/* configure CAN0 NVIC */
nvic_irq_enable(CAN0_RX0_IRQn, 1, 0);
nvic_irq_enable(CAN0_TX_IRQn, 1, 1); // 添加发送中断
/* enable can receive FIFO0 not empty interrupt */
can_interrupt_enable(CAN0, CAN_INTEN_RFNEIE0);
/* enable can transmit mailbox empty interrupt */
can_interrupt_enable(CAN0, CAN_INTEN_TMEIE);
// 使能DMA中断
nvic_irq_enable(DMA0_Channel4_IRQn, 1, 1);
dma_interrupt_enable(DMA0, DMA_CH4, DMA_INT_FTF);
}
/*!
\brief 初始化CAN0 CANFD模式
\param[in] none
\param[out] none
\retval none
*/
void canfd_config(void) {
can_gpio_init();
can_dma_init(); // 初始化DMA
can_parameter_struct can_parameter;
can_fdframe_struct can_fd_parameter;
can_fd_tdc_struct can_fd_tdc_parameter;
can_filter_parameter_struct can_filter;
/* initialize CAN register */
can_deinit(CAN0);
/* initialize CAN */
can_parameter.time_triggered = DISABLE;
can_parameter.auto_bus_off_recovery = DISABLE;
can_parameter.auto_wake_up = DISABLE;
can_parameter.auto_retrans = ENABLE;
can_parameter.rec_fifo_overwrite = ENABLE;
can_parameter.trans_fifo_order = ENABLE;
can_parameter.working_mode = CAN_NORMAL_MODE;
/* baudrate 1Mbps, sample piont at 80% */
can_parameter.resync_jump_width = CAN_BT_SJW_1TQ;
can_parameter.time_segment_1 = CAN_BT_BS1_7TQ;
can_parameter.time_segment_2 = CAN_BT_BS2_2TQ;
can_parameter.prescaler = 6;
can_init(CAN0, &can_parameter);
can_struct_para_init(CAN_FD_FRAME_STRUCT, &can_fd_parameter);
can_fd_parameter.fd_frame = ENABLE;
can_fd_parameter.excp_event_detect = ENABLE;
can_fd_parameter.delay_compensation = ENABLE;
can_fd_tdc_parameter.tdc_filter = 0x04;
can_fd_tdc_parameter.tdc_mode = CAN_TDCMOD_CALC_AND_OFFSET;
can_fd_tdc_parameter.tdc_offset = 0x04;
can_fd_parameter.p_delay_compensation = &can_fd_tdc_parameter;
can_fd_parameter.iso_bosch = CAN_FDMOD_ISO;
can_fd_parameter.esi_mode = CAN_ESIMOD_HARDWARE;
/* FD mode data baudrate 2Mbps, sample piont at 80% */
can_fd_parameter.data_resync_jump_width = CAN_BT_SJW_1TQ;
can_fd_parameter.data_time_segment_1 = CAN_BT_BS1_3TQ;
can_fd_parameter.data_time_segment_2 = CAN_BT_BS2_1TQ;
/* CAN-FD data segement prescaler should be the same as non-data segement
* prescaler */
can_fd_parameter.data_prescaler = 6;
can_fd_init(CAN0, &can_fd_parameter);
/* initialize filter */
can_filter.filter_mode = CAN_FILTERMODE_MASK;
can_filter.filter_bits = CAN_FILTERBITS_32BIT;
/* configure filter ID */
can_filter.filter_list_high = 0x0000;
can_filter.filter_list_low = 0x0000;
/* configure filter mask */
can_filter.filter_mask_high = 0x0000;
can_filter.filter_mask_low = 0x0000;
/* select receiver fifo */
can_filter.filter_fifo_number = CAN_FIFO0;
can_filter.filter_enable = ENABLE;
/* configure filter number */
can_filter.filter_number = 0;
can_filter_init(&can_filter);
/* configure CAN0 NVIC */
nvic_irq_enable(CAN0_RX0_IRQn, 1, 0);
/* enable can receive FIFO0 not empty interrupt */
can_interrupt_enable(CAN0, CAN_INTEN_RFNEIE0);
// 使能DMA中断
nvic_irq_enable(DMA0_Channel4_IRQn, 1, 1);
dma_interrupt_enable(DMA0, DMA_CH4, DMA_INT_FTF);
}
/*!
\brief 初始化CAN0回环测试
\param[in] none
\param[out] none
\retval none
*/
void can_loopback_init(void) {
can_gpio_init();
can_parameter_struct can_parameter;
can_filter_parameter_struct can_filter;
/* initialize CAN register */
can_deinit(CANX);
/* initialize CAN */
can_parameter.time_triggered = DISABLE;
can_parameter.auto_bus_off_recovery = DISABLE;
can_parameter.auto_wake_up = DISABLE;
can_parameter.auto_retrans = DISABLE;
can_parameter.rec_fifo_overwrite = DISABLE;
can_parameter.trans_fifo_order = DISABLE;
can_parameter.working_mode = CAN_NORMAL_MODE;
/* baudrate 1Mbps, sample piont at 80% */
can_parameter.resync_jump_width = CAN_BT_SJW_1TQ;
can_parameter.time_segment_1 = CAN_BT_BS1_7TQ;
can_parameter.time_segment_2 = CAN_BT_BS2_2TQ;
can_parameter.prescaler = 6;
if (can_init(CANX, &can_parameter) != SUCCESS) {
u16 i = 200;
while (--i > 0) {
delay_1ms(10);
printf("can init error \r\n");
}
system_soft_reset();
}
/* initialize filter */
/* configure filter mode */
can_filter.filter_mode = CAN_FILTERMODE_MASK;
can_filter.filter_bits = CAN_FILTERBITS_32BIT;
/* configure filter ID */
can_filter.filter_list_high = (uint16_t)(DEV_CAN_LOOPBACK_ID >> 13U);
can_filter.filter_list_low =
((uint16_t)(DEV_CAN_LOOPBACK_ID)) << 3U | (1U << 2);
/* configure filter mask */
can_filter.filter_mask_high = 0x0000;
can_filter.filter_mask_low = 0x0000;
/* select receiver fifo */
can_filter.filter_fifo_number = CAN_FIFO0;
can_filter.filter_enable = ENABLE;
/* configure filter number */
can_filter.filter_number = 0;
can_filter_init(&can_filter);
}
/*!
\brief CAN0 FD回环测试
\param[in] none
\param[out] none
\retval ErrStatus
*/
void canfd_loopback_test(void) {
can_trasnmit_message_struct transmit_message;
can_receive_message_struct receive_message;
uint32_t timeout = 0xFFFF;
uint8_t transmit_mailbox = 0;
std::mt19937 gen;
std::uniform_int_distribution<int> dis(0, 255);
can_struct_para_init(CAN_FD_FRAME_STRUCT, &transmit_message);
transmit_message.tx_sfid = DEV_CAN_LOOPBACK_ID;
transmit_message.tx_efid = 0x00;
transmit_message.tx_ft = CAN_FT_DATA;
transmit_message.tx_ff = CAN_FF_EXTENDED;
transmit_message.tx_dlen = 7;
transmit_message.fd_flag = 1;
transmit_message.fd_brs = 1;
transmit_message.fd_esi = 0;
int i = 0;
while (i++ < transmit_message.tx_dlen) {
transmit_message.tx_data[i] = dis(gen);
std::printf("%x\n", transmit_message.tx_data[i]);
}
/* transmit message */
transmit_mailbox = can_message_transmit(CAN0, &transmit_message);
/* waiting for transmit completed */
while ((CAN_TRANSMIT_OK != can_transmit_states(CAN0, transmit_mailbox)) &&
(0 != timeout)) {
timeout--;
}
timeout = 0xFFFF;
/* waiting for receive completed */
while ((can_receive_message_length_get(CAN0, CAN_FIFO0) < 1) &&
(0 != timeout)) {
timeout--;
}
can_struct_para_init(CAN_RX_MESSAGE_STRUCT, &receive_message);
can_message_receive(CAN0, CAN_FIFO0, &receive_message);
/* check the receive message */
if ((transmit_message.tx_sfid == receive_message.rx_sfid) &&
(transmit_message.tx_ff == receive_message.rx_ff) &&
(transmit_message.tx_dlen == receive_message.rx_dlen)) {
/* loopback test is success */
std::printf("CAN LO0PBACK SUCCESS\r\n");
} else {
/* loopback test is failed */
std::printf("CAN LO0PBACK FAIL\r\n");
}
}
/**
\brief CAN0 回环测试
\param[in] none
\param[out] none
\retval none
*/
void can_loopback_test(void) {
can_trasnmit_message_struct transmit_message;
can_receive_message_struct receive_message;
uint32_t timeout = 0xFF;
uint8_t transmit_mailbox = 0;
std::mt19937 gen(rand()); // 使用随机设备生成的种子
std::uniform_int_distribution<int> dis(0, 0xff);
can_struct_para_init(CAN_TX_MESSAGE_STRUCT, &transmit_message);
/* initialize transmit message */
transmit_message.tx_sfid = DEV_CAN_LOOPBACK_ID;
transmit_message.tx_ft = CAN_FT_DATA;
transmit_message.tx_ff = CAN_FF_STANDARD;
transmit_message.tx_dlen = 7;
int i = 0;
while (i++ < transmit_message.tx_dlen) {
// transmit_message.tx_data[i] = dis(gen);
transmit_message.tx_data[i] = i;
}
/* transmit message */
transmit_mailbox = can_message_transmit(CANX, &transmit_message);
/* waiting for transmit completed */
while ((CAN_TRANSMIT_OK != can_transmit_states(CANX, transmit_mailbox)) &&
(0 != timeout)) {
printf("sending:%x...\n", can_transmit_states(CANX, transmit_mailbox));
timeout--;
}
timeout = 0xFF;
/* waiting for receive completed */
while ((can_receive_message_length_get(CANX, CAN_FIFO0) < 1) &&
(0 != timeout)) {
timeout--;
}
can_struct_para_init(CAN_RX_MESSAGE_STRUCT, &receive_message);
can_message_receive(CANX, CAN_FIFO0, &receive_message);
/* check the receive message */
if ((DEV_CAN_LOOPBACK_ID == receive_message.rx_sfid) &&
(CAN_FF_STANDARD == receive_message.rx_ff) &&
(transmit_message.tx_dlen == receive_message.rx_dlen)) {
i = transmit_message.tx_dlen;
while (i-- > 0) {
std::printf("rx %d:%x:%x\n", i, transmit_message.tx_data[i],
receive_message.rx_data[i]);
}
if (std::memcmp(receive_message.rx_data, transmit_message.tx_data,
transmit_message.tx_dlen) == 0) {
/* loopback test is success */
std::printf("loopback success\n");
} else {
std::printf("loopback failed\n");
}
} else {
/* loopback test is failed */
std::printf("loopback failed\n");
}
}
/*!
\brief CAN_transmiter构造函数
\note 初始化CAN通信相关参数和硬件配置
*/
u8 CAN_transmiter::init() {
// 初始化CAN硬件
// can_config();
canfd_config();
// 初始化发送消息结构体
can_struct_para_init(CAN_TX_MESSAGE_STRUCT, &transmit_message);
/* initialize receive message */
can_struct_para_init(CAN_RX_MESSAGE_STRUCT, &receive_message);
// 初始化DMA缓冲区
memset(can_rx_buffer, 0, sizeof(can_rx_buffer));
memset(can_tx_buffer, 0, sizeof(can_tx_buffer));
return 0;
}
/*!
\brief CAN 数据更新
*/
void CAN_transmiter::update(void) {
target_angle_union.f = FOC.target_angle;
target_velocity_union.f = FOC.target_velocity;
limit_velocity_union.f = FOC.limit_velocity;
limit_voltage = FOC.limit_voltage * 1000;
mcu_temp = sampler.get_mcu_temp() * 100;
motor_temp = sampler.get_drv_temp() * 100;
Power_Voltage = sampler.get_vbus_voltage() * 1000;
rt_angle_union.f = FOC.rt_angle;
rt_velocity_union.f = FOC.rt_velocity;
MotorStatus = gpio_input_bit_get(GPIOB, GPIO_PIN_2) == RESET;
EEPROMStatus = flashEEP.EEPROMStatus;
Target_Control_Mode = FOC.control_mode;
controller_Mode = FOC.control_mode;
// 使用简单平均滤波的电流值
u_current_union.f = sampler.get_current('U') * 1000;
w_current_union.f = sampler.get_current('W') * 1000;
v_current_union.f = sampler.get_current('V') * 1000;
}
/**
* @brief CAN发送函数
* @retval 0: 发送失败
* 1: 发送成功
*/
u8 CAN_transmiter::CAN_all_Send() {
u32 success_flag = 0;
constexpr u32 RT_Vel_Ang_FEED = 0x101;
constexpr u32 SET_Vel_Ang_FEED = 0x110;
constexpr u32 Current_FEED = 0x117;
constexpr u32 Status_FEED = 0x118;
constexpr u32 Limit_Vel_Vol_FEED = 0x119;
// 打包RT_Vel_Ang_FEED - 只清零实际使用的8字节
memset(transmit_data, 0, 8);
pack_float_to_bytes(transmit_data, 0, rt_angle_union);
pack_float_to_bytes(transmit_data, 4, rt_velocity_union);
success_flag += CAN_AsyncSend(RT_Vel_Ang_FEED, 8, transmit_data);
// 打包SET_Vel_Ang_FEED - 只清零实际使用的8字节
memset(transmit_data, 0, 8);
pack_float_to_bytes(transmit_data, 0, target_angle_union);
pack_float_to_bytes(transmit_data, 4, target_velocity_union);
success_flag += CAN_AsyncSend(SET_Vel_Ang_FEED, 8, transmit_data);
// 打包Current_FEED - 只清零实际使用的6字节
memset(transmit_data, 0, 6);
pack_u16_to_bytes(transmit_data, 0, u16(u_current_union.f));
pack_u16_to_bytes(transmit_data, 2, u16(w_current_union.f));
pack_u16_to_bytes(transmit_data, 4, u16(v_current_union.f));
success_flag += CAN_AsyncSend(Current_FEED, 6, transmit_data);
// 打包Status_FEED - 只清零实际使用的8字节
memset(transmit_data, 0, 8);
transmit_data[0] = MotorStatus;
transmit_data[1] = controller_Mode;
pack_u16_to_bytes(transmit_data, 2, motor_temp);
pack_u16_to_bytes(transmit_data, 4, mcu_temp);
pack_u16_to_bytes(transmit_data, 6, Power_Voltage);
success_flag += CAN_AsyncSend(Status_FEED, 8, transmit_data);
// 打包Limit_Vel_Vol_FEED - 只清零实际使用的6字节
memset(transmit_data, 0, 6);
pack_float_to_bytes(transmit_data, 0, limit_velocity_union);
pack_u16_to_bytes(transmit_data, 4, limit_voltage);
success_flag += CAN_AsyncSend(Limit_Vel_Vol_FEED, 6, transmit_data);
return success_flag;
}
/**
* @brief CANFD发送函数
* @retval 0: 发送失败
* 1: 发送成功
*/
u8 CAN_transmiter::CANFD_all_Send() {
u32 success_flag = 0;
// 打包status数据 - 只清零实际使用的32字节
memset(transmit_data, 0, 32);
pack_u16_to_bytes(transmit_data, 0, mcu_temp);
pack_u16_to_bytes(transmit_data, 2, motor_temp);
pack_u16_to_bytes(transmit_data, 4, u16(u_current_union.f));
pack_u16_to_bytes(transmit_data, 6, u16(v_current_union.f));
pack_u16_to_bytes(transmit_data, 8, u16(w_current_union.f));
transmit_data[10] =
(transmit_data[10] & ~0x07) |
((MotorStatus & 0x01) | ((MagStatus & 0x01) << 1) |
((ThermalStatus & 0x01) << 2) | ((EEPROMStatus & 0x07) << 3));
pack_u16_to_bytes(transmit_data, 11, Power_Voltage);
pack_float_to_bytes(transmit_data, 13, rt_angle_union);
pack_float_to_bytes(transmit_data, 17, rt_velocity_union);
pack_float_to_bytes(transmit_data, 21, testfloat_union);
success_flag += CANFD_AsyncSend(CANFD_STATUS_ID, 32, transmit_data);
// 打包config数据 - 只清零实际使用的16字节
memset(transmit_data, 0, 16);
transmit_data[0] = controller_Mode;
pack_u16_to_bytes(transmit_data, 1, limit_voltage);
pack_float_to_bytes(transmit_data, 3, limit_velocity_union);
pack_float_to_bytes(transmit_data, 7, target_angle_union);
pack_float_to_bytes(transmit_data, 11, target_velocity_union);
success_flag += CANFD_AsyncSend(CANFD_CONFIG_ID, 16, transmit_data);
return success_flag;
}
/**
* @brief CAN通信检查函数
* @retval 0: 无新消息
* 1: 有新消息
*/
void CAN_transmiter::communication_check() {
// CAN0 发送数据标志
if (SET == can0_send_flag) {
// printf("\r\n can0 %X receive data:", receive_message.rx_efid);
update();
// CAN0_transmiter.CAN_all_Send();
CANFD_all_Send();
can0_send_flag = RESET;
}
// CAN0 接收数据标志
if (SET == can0_receive_flag) {
// printf("\r\n can0 %X receive data:", receive_message.rx_efid);
// for (i = 0; i < receive_message.rx_dlen; i++) {
// printf(" %02x", receive_message.rx_data[i]);
// }
if (receive_message.rx_efid == CANFD_CMD_ID) {
FOC.control_mode = receive_message.rx_data[0];
if (float(unpack_bytes_to_u16(receive_message.rx_data, 1)) / 1000 !=
FOC.limit_voltage) {
FOC.limit_voltage =
float(unpack_bytes_to_u16(receive_message.rx_data, 1)) /
1000;
}
if (unpack_bytes_to_float(receive_message.rx_data, 3).f !=
FOC.limit_velocity) {
FOC.limit_velocity =
unpack_bytes_to_float(receive_message.rx_data, 3).f;
}
target_angle_union.f =
unpack_bytes_to_float(receive_message.rx_data, 7).f;
FOC.target_angle = target_angle_union.f;
target_velocity_union.f =
unpack_bytes_to_float(receive_message.rx_data, 11).f;
FOC.target_velocity = target_velocity_union.f;
} else if (receive_message.rx_efid == CANFD_RESET_ID) {
u8 first_byte = receive_message.rx_data[0];
u8 eigth_byte = receive_message.rx_data[7];
if (first_byte & 0x01) {
motor_reset();
}
if (first_byte >> 1 & 0x01) {
flashEEP.format();
}
if (first_byte >> 2 & 0x01) {
flashEEP.save_system_config(false);
}
if (first_byte >> 3 & 0x01) {
KTH7823.angle_set(0);
Angle_kalman.init(0); // 角度滤波
Vel_kalman.init(0); // 角度滤波
}
if (eigth_byte & 0x80 >> 7) {
prepare_deep_sleep(true);
// CAN_Sleep();
}
} else if (receive_message.rx_efid == CANFD_BOOT_ID) {
jumpToBOOT();
} else if (receive_message.rx_efid == 0x00000102) {
volatile u32 *flash_ptr = (volatile u32 *)n_APP_LATEST_EN_ADDR;
u32 app_enable = *flash_ptr;
flash_ptr = (volatile u32 *)n_APP_LATEST_CHECK_ADDR;
u32 app_check = *flash_ptr;
transmit_data[0] = 0x0A;
transmit_data[1] = 0xAC;
delay_1ms(1);
if (app_enable == OTA_AVAL && app_check == OTA_AVAL) {
CANFD_AsyncSend(CANFD_OTA_ACK_ID, 2, transmit_data);
}
} else {
printf("Unknown CAN ID: %X\n", receive_message.rx_efid);
}
can0_receive_flag = RESET;
}
}
/**
* @brief CAN睡眠
* @param None
* @retval None
*/
u8 CAN_transmiter::CAN_Sleep() {
gpio_bit_set(GPIOB, GPIO_PIN_13);
is_sleep = true;
return 0;
}
/**
* @brief CAN唤醒
* @param None
* @retval None
*/
u8 CAN_transmiter::CAN_Wakeup() {
printf("can wake\r\n");
is_sleep = false;
canfd_config();
return 0;
}
/**
* @brief CAN0中断服务程序
* @retval 无
*/
void CAN0_RX0_IRQHandler(void) {
// 检查是否是FIFO0消息挂起中断
if (can_interrupt_flag_get(CAN0, CAN_INT_FLAG_RFL0) != RESET) {
// 清除中断标志
can_interrupt_flag_clear(CAN0, CAN_INT_FLAG_RFL0);
// 使用DMA读取接收到的数据
dma_channel_disable(DMA0, DMA_CH4);
dma_rx_parameter.number =
can_receive_message_length_get(CAN0, CAN_FIFO0);
dma_init(DMA0, DMA_CH4, &dma_rx_parameter);
dma_channel_enable(DMA0, DMA_CH4);
// 读取接收到的数据
can_message_receive(CAN0, CAN_FIFO0, &CAN0_transmiter.receive_message);
// 接收标志位置1
CAN0_transmiter.can0_receive_flag = SET;
}
// 检查其他可能的中断源
if (can_interrupt_flag_get(CAN0, CAN_INT_FLAG_RFF0) != RESET) {
// FIFO0满中断
can_interrupt_flag_clear(CAN0, CAN_INT_FLAG_RFF0);
printf("CAN FIFO0 full\n");
}
if (can_interrupt_flag_get(CAN0, CAN_INT_FLAG_RFO0) != RESET) {
// FIFO0溢出中断
can_interrupt_flag_clear(CAN0, CAN_INT_FLAG_RFO0);
printf("CAN FIFO0 overflow\n");
}
}
/**
* @brief DMA通道4中断服务程序(CAN接收DMA)
* @retval 无
*/
void DMA0_Channel4_IRQHandler(void) {
if (dma_interrupt_flag_get(DMA0, DMA_CH4, DMA_INT_FLAG_FTF)) {
// 清除DMA传输完成中断标志
dma_interrupt_flag_clear(DMA0, DMA_CH4, DMA_INT_FLAG_G);
// 将DMA缓冲区的数据复制到接收消息结构体
for (int i = 0; i < CAN0_transmiter.receive_message.rx_dlen && i < 8;
i++) {
CAN0_transmiter.receive_message.rx_data[i] = can_rx_buffer[i];
}
}
}
/**
* @brief DMA通道5中断服务程序(CAN/CANFD发送DMA)
* @retval 无
*/
void DMA0_Channel5_IRQHandler(void) {
if (dma_interrupt_flag_get(DMA0, DMA_CH5, DMA_INT_FLAG_FTF)) {
// DMA传输完成，可以在此处执行后续处理
// 清除DMA传输完成中断标志
dma_interrupt_flag_clear(DMA0, DMA_CH5, DMA_INT_FLAG_FTF);
// 可以在此添加后续处理逻辑，如发送下一个数据包等
}
}
/**
* @brief 异步CAN数据发送(使用DMA和中断机制)
* @param id CAN消息ID
* @param length CAN消息长度
* @param data CAN消息数据
*/
u8 CAN_transmiter::CAN_AsyncSend(u32 id, u8 length, u8 *data) {
// 检查数据长度是否符合CAN规范
if (length > 8) {
printf("CAN data length exceeds maximum of 8 bytes\r\n");
return 0;
}
// 检查数据指针是否有效
if (data == nullptr) {
printf("Invalid data pointer\r\n");
return 0;
}
/* 配置发送消息参数 */
transmit_message.tx_ft = CAN_FT_DATA; // 数据帧
transmit_message.tx_ff = CAN_FF_STANDARD; // 标准帧格式
transmit_message.tx_sfid = id; // 设置帧ID
transmit_message.tx_dlen = length; // 设置数据长度
// 复制数据到发送缓冲区
for (int i = 0; i < length && i < 8; i++) {
transmit_message.tx_data[i] = *(data + i);
}
// 自动选择空闲mailbox发送消息
transmit_mailbox = can_message_transmit(CAN0, &transmit_message);
// 检查是否成功获取mailbox
if (transmit_mailbox == CAN_NOMAILBOX) {
// 没有可用的mailbox，启用发送中断以便在邮箱可用时重试
printf("No available mailbox for CAN transmission, enabling TX "
"interrupt\r\n");
// 可以设置一个标志位，当邮箱可用时发送
// 在实际应用中，可以维护一个待发送队列
return 0;
}
// 启用CAN发送中断以检测传输完成
can_interrupt_enable(CAN0, CAN_INTEN_TMEIE);
return 1;
}
/**
* @brief 异步CANFD数据发送(使用DMA和中断机制)
* @param id CAN消息ID
* @param length CAN消息长度
* @param data CAN消息数据
*/
u8 CAN_transmiter::CANFD_AsyncSend(u32 id, u8 length, u8 *data) {
u8 valid_length = length;
// 检查CANFD模式是否启用
if (!(CAN_CTL(CAN0) & CAN_CTL_DFZ)) {
printf("CANFD mode not enabled\r\n");
return 0;
}
// 检查数据指针是否有效
if (data == nullptr) {
printf("Invalid data pointer\r\n");
return 0;
}
// 检查数据长度是否符合CANFD规范
if (length > 8) {
if (length > 8 and length < 13) {
valid_length = 12;
} else if (length > 12 and length < 17) {
valid_length = 16;
} else if (length > 16 and length < 21) {
valid_length = 20;
} else if (length > 20 and length < 24) {
valid_length = 24;
} else if (length > 28 and length < 33) {
valid_length = 32;
} else if (length > 32 and length < 49) {
valid_length = 48;
} else if (length > 48 and length < 65) {
valid_length = 64;
} else {
printf("CANFD data length error\r\n");
return 0;
}
}
/* 配置发送消息参数 */
transmit_message.tx_ft = CAN_FT_DATA; // 数据帧
transmit_message.tx_ff = CAN_FF_EXTENDED; // 扩展帧格式
transmit_message.tx_efid = id; // 扩展帧ID
transmit_message.tx_dlen = valid_length; // 设置数据长度
// 设置CANFD特定参数
transmit_message.fd_flag = CAN_FDF_FDFRAME; // CANFD帧格式
transmit_message.fd_brs = ENABLE; // 使能比特率切换
transmit_message.fd_esi = DISABLE; // 错误状态指示
// 复制数据到发送缓冲区
for (int i = 0; i < valid_length; i++) {
if (i < length) {
transmit_message.tx_data[i] = *(data + i);
} else {
transmit_message.tx_data[i] = 0;
}
}
// 自动选择空闲mailbox发送消息
transmit_mailbox = can_message_transmit(CAN0, &transmit_message);
// 检查是否成功获取mailbox
if (transmit_mailbox == CAN_NOMAILBOX) {
// 没有可用的mailbox，启用发送中断以便在邮箱可用时重试
printf("No available mailbox for CANFD transmission, enabling TX "
"interrupt\r\n");
return 0;
}
// 启用CAN发送中断以检测传输完成
can_interrupt_enable(CAN0, CAN_INTEN_TMEIE);
return 1;
}
// 添加CAN传输中断处理函数
void CAN0_TX_IRQHandler(void) {
// 检查是否有发送邮箱空闲
if (can_flag_get(CAN0, CAN_FLAG_TME0) != RESET ||
can_flag_get(CAN0, CAN_FLAG_TME1) != RESET ||
can_flag_get(CAN0, CAN_FLAG_TME2) != RESET) {
// 邮箱已空闲，可以发送新消息
// 可以在这里处理待发送队列中的消息
// 清除发送中断标志
can_flag_clear(CAN0, CAN_FLAG_TME0);
can_flag_clear(CAN0, CAN_FLAG_TME1);
can_flag_clear(CAN0, CAN_FLAG_TME2);
}
}
Reference in New Issue View Git Blame Copy Permalink