cbb/Motor_v2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

feat: 更新CMSIS和GD32C10x_DFP包版本并优化代码

Browse Source 
- 升级ARM::CMSIS从4.5.0到6.1.0版本
- 添加ARM::CMSIS-DSP@1.16.2依赖包
- 升级GigaDevice::GD32C10x_DFP从1.0.1到1.5.0版本
- 移除FOC.cpp中未使用的systick.h头文件
- 移除pid.cpp中未使用的<algorithm>头文件
- 更新GD32C10x固件库至V1.7.0版本(2026-01-30)
- 修复ADC驱动中的无符号整数运算问题
- 优化BKP、CAN、CTC等外设驱动中的FlagStatus返回逻辑
- 改进CAN驱动的消息发送和传输停止函数实现
- 修复CRC、DMA、FMC等驱动中的数据类型和变量声明问题
- 清理和修正各驱动文件中的文档注释
This commit is contained in:
cbb
2026-05-06 00:14:16 +08:00
parent f4fb23d640
commit 94d5fda0b6
30 changed files with 409 additions and 327 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Robot_V2.cbuild-pack.yml
+5 -2
View File
@@ -1,8 +1,11 @@
cbuild-pack:
resolved-packs:
- resolved-pack: ARM::CMSIS@4.5.0
- resolved-pack: ARM::CMSIS@6.1.0
selected-by-pack:
- ARM::CMSIS
- resolved-pack: GigaDevice::GD32C10x_DFP@1.0.1
- resolved-pack: ARM::CMSIS-DSP@1.16.2
selected-by-pack:
- ARM::CMSIS-DSP
- resolved-pack: GigaDevice::GD32C10x_DFP@1.5.0
selected-by-pack:
- GigaDevice::GD32C10x_DFP
Robot_V2/Algorithm/FOC.cpp
-1
View File
@@ -7,7 +7,6 @@
#include "config.h"
#include "motor.h"
#include "pid.h"
#include "systick.h"
#include <arm_math.h>
#include <cmath>
#include <gd32c10x.h>
Robot_V2/Algorithm/pid.cpp
-1
View File
@@ -3,7 +3,6 @@
((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)))
#include "Can.h"
#include "config.h"
#include <algorithm>
#include <cmath>
extern CAN_transmiter CAN0_transmiter;
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_adc.c
+4 -7
View File
@@ -2,11 +2,11 @@
\file gd32c10x_adc.c
\brief ADC driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -508,8 +508,8 @@ void adc_inserted_channel_config(uint32_t adc_periph , uint8_t rank , uint8_t ad
inserted_length = (uint8_t)GET_BITS(ADC_ISQ(adc_periph) , 20U , 21U);
/* the channel number is written to these bits to select a channel as the nth conversion in the inserted channel group */
isq = ADC_ISQ(adc_periph);
isq &= ~((uint32_t)(ADC_ISQ_ISQN << (5U * ((3 + rank) - inserted_length))));
isq |= ((uint32_t)adc_channel << (5U * ((3 + rank) - inserted_length)));
isq &= ~((uint32_t)(ADC_ISQ_ISQN << (5U * ((3U + rank) - inserted_length))));
isq |= ((uint32_t)adc_channel << (5U * ((3U + rank) - inserted_length)));
ADC_ISQ(adc_periph) = isq;
/* ADC sampling time config */
@@ -669,7 +669,6 @@ void adc_software_trigger_enable(uint32_t adc_periph , uint8_t adc_channel_group
/*!
\brief read ADC regular group data register
\param[in] adc_periph: ADCx,x=0,1
\param[in] none
\param[out] none
\retval the conversion value
*/
@@ -848,7 +847,6 @@ void adc_flag_clear(uint32_t adc_periph , uint32_t adc_flag)
/*!
\brief get the bit state of ADCx software start conversion
\param[in] adc_periph: ADCx, x=0,1, only one among these parameters can be selected
\param[in] none
\param[out] none
\retval FlagStatus: SET or RESET
*/
@@ -864,7 +862,6 @@ FlagStatus adc_regular_software_startconv_flag_get(uint32_t adc_periph)
/*!
\brief get the bit state of ADCx software inserted channel start conversion
\param[in] adc_periph: ADCx, x=0,1 only one among these parameters can be selected
\param[in] none
\param[out] none
\retval FlagStatus: SET or RESET
*/
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_bkp.c
+12 -6
View File
@@ -2,11 +2,11 @@
\file gd32c10x_bkp.c
\brief BKP driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -287,11 +287,14 @@ void bkp_interrupt_disable(void)
*/
FlagStatus bkp_flag_get(void)
{
FlagStatus ret;
if(RESET != (BKP_TPCS & BKP_FLAG_TAMPER)){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
@@ -313,11 +316,14 @@ void bkp_flag_clear(void)
*/
FlagStatus bkp_interrupt_flag_get(void)
{
FlagStatus ret;
if(RESET != (BKP_TPCS & BKP_INT_FLAG_TAMPER)){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_can.c
+137 -99
View File
@@ -2,11 +2,11 @@
\file gd32c10x_can.c
\brief CAN driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -33,7 +33,6 @@ OF SUCH DAMAGE.
*/
#include "gd32c10x_can.h"
#include "stdio.h"
#include <stdlib.h>
#define CAN_ERROR_HANDLE(s) do{}while(1)
@@ -301,10 +300,11 @@ ErrStatus can_fd_init(uint32_t can_periph, can_fdframe_struct *can_fdframe_init)
{
uint32_t timeout = CAN_TIMEOUT;
uint32_t tempreg = 0U;
ErrStatus reval = SUCCESS;
/* check null pointer */
if(0 == can_fdframe_init) {
return ERROR;
reval = ERROR;
}
/* disable sleep mode */
CAN_CTL(can_periph) &= ~CAN_CTL_SLPWMOD;
@@ -316,7 +316,7 @@ ErrStatus can_fd_init(uint32_t can_periph, can_fdframe_struct *can_fdframe_init)
}
/* check initialize working success */
if(CAN_STAT_IWS != (CAN_STAT(can_periph) & CAN_STAT_IWS)) {
return ERROR;
reval = ERROR;
} else {
/* set the data bit timing register */
CAN_DBT(can_periph) = (BT_DSJW((uint32_t)can_fdframe_init->data_resync_jump_width) | \
@@ -342,7 +342,7 @@ ErrStatus can_fd_init(uint32_t can_periph, can_fdframe_struct *can_fdframe_init)
CAN_FDTDC(can_periph) = (FDTDC_TDCF(can_fdframe_init->p_delay_compensation->tdc_filter) | FDTDC_TDCO(
can_fdframe_init->p_delay_compensation->tdc_offset));
} else {
return ERROR;
reval = ERROR;
}
} else {
/* Transmitter delay compensation mode is disabled */
@@ -366,11 +366,11 @@ ErrStatus can_fd_init(uint32_t can_periph, can_fdframe_struct *can_fdframe_init)
}
/* check exit initialize mode */
if(0U == timeout) {
return ERROR;
reval = ERROR;
}
}
return SUCCESS;
return reval;
}
/*!
@@ -747,90 +747,89 @@ uint8_t can_message_transmit(uint32_t can_periph, can_trasnmit_message_struct *t
} else {
mailbox_number = CAN_NOMAILBOX;
}
/* return no mailbox empty */
if(CAN_NOMAILBOX == mailbox_number) {
return CAN_NOMAILBOX;
}
/* got one empty mailbox */
if(CAN_NOMAILBOX != mailbox_number) {
CAN_TMI(can_periph, mailbox_number) &= CAN_TMI_TEN;
if(CAN_FF_STANDARD == transmit_message->tx_ff) {
/* set transmit mailbox standard identifier */
CAN_TMI(can_periph, mailbox_number) |= (uint32_t)(TMI_SFID(transmit_message->tx_sfid) | \
transmit_message->tx_ft);
} else {
/* set transmit mailbox extended identifier */
CAN_TMI(can_periph, mailbox_number) |= (uint32_t)(TMI_EFID(transmit_message->tx_efid) | \
transmit_message->tx_ff | \
transmit_message->tx_ft);
}
if(CAN_FDF_CLASSIC == transmit_message->fd_flag) {
/* set the data length */
CAN_TMP(can_periph, mailbox_number) &= ~(CAN_TMP_DLENC | CAN_TMP_ESI | CAN_TMP_BRS | CAN_TMP_FDF);
/* Classic CAN frame data length does not exceed 8 */
if (transmit_message->tx_dlen > 8U) {
transmit_message->tx_dlen = 8U;
CAN_TMI(can_periph, mailbox_number) &= CAN_TMI_TEN;
if(CAN_FF_STANDARD == transmit_message->tx_ff) {
/* set transmit mailbox standard identifier */
CAN_TMI(can_periph, mailbox_number) |= (uint32_t)(TMI_SFID(transmit_message->tx_sfid) | \
transmit_message->tx_ft);
} else {
/* set transmit mailbox extended identifier */
CAN_TMI(can_periph, mailbox_number) |= (uint32_t)(TMI_EFID(transmit_message->tx_efid) | \
transmit_message->tx_ff | \
transmit_message->tx_ft);
}
CAN_TMP(can_periph, mailbox_number) |= transmit_message->tx_dlen;
/* set the data */
CAN_TMDATA0(can_periph, mailbox_number) = TMDATA0_DB3(transmit_message->tx_data[3]) | \
TMDATA0_DB2(transmit_message->tx_data[2]) | \
TMDATA0_DB1(transmit_message->tx_data[1]) | \
TMDATA0_DB0(transmit_message->tx_data[0]);
CAN_TMDATA1(can_periph, mailbox_number) = TMDATA1_DB7(transmit_message->tx_data[7]) | \
TMDATA1_DB6(transmit_message->tx_data[6]) | \
TMDATA1_DB5(transmit_message->tx_data[5]) | \
TMDATA1_DB4(transmit_message->tx_data[4]);
} else {
canfd_en = CAN_FDCTL(can_periph) & CAN_FDCTL_FDEN;
/* check FD function has been enabled */
if(canfd_en) {
if(transmit_message->tx_dlen <= 8U) {
/* set the data length */
reg_temp |= transmit_message->tx_dlen;
} else {
/* data length greater than 8 */
for(i = 0U; i < 7U; i++) {
if(transmit_message->tx_dlen == g_can_fdlength_table[i]) {
hit = 1U;
break;
if(CAN_FDF_CLASSIC == transmit_message->fd_flag) {
/* set the data length */
CAN_TMP(can_periph, mailbox_number) &= ~(CAN_TMP_DLENC | CAN_TMP_ESI | CAN_TMP_BRS | CAN_TMP_FDF);
/* Classic CAN frame data length does not exceed 8 */
if (transmit_message->tx_dlen > 8U) {
transmit_message->tx_dlen = 8U;
}
CAN_TMP(can_periph, mailbox_number) |= transmit_message->tx_dlen;
/* set the data */
CAN_TMDATA0(can_periph, mailbox_number) = TMDATA0_DB3(transmit_message->tx_data[3]) | \
TMDATA0_DB2(transmit_message->tx_data[2]) | \
TMDATA0_DB1(transmit_message->tx_data[1]) | \
TMDATA0_DB0(transmit_message->tx_data[0]);
CAN_TMDATA1(can_periph, mailbox_number) = TMDATA1_DB7(transmit_message->tx_data[7]) | \
TMDATA1_DB6(transmit_message->tx_data[6]) | \
TMDATA1_DB5(transmit_message->tx_data[5]) | \
TMDATA1_DB4(transmit_message->tx_data[4]);
} else {
canfd_en = CAN_FDCTL(can_periph) & CAN_FDCTL_FDEN;
/* check FD function has been enabled */
if(canfd_en) {
if(transmit_message->tx_dlen <= 8U) {
/* set the data length */
reg_temp |= transmit_message->tx_dlen;
} else {
/* data length greater than 8 */
for(i = 0U; i < 7U; i++) {
if(transmit_message->tx_dlen == g_can_fdlength_table[i]) {
hit = 1U;
break;
}
}
/* data length is valid */
if(1U == hit) {
reg_temp |= 9U + i;
} else {
CAN_ERROR_HANDLE("dlen is invalid \r\n");
}
}
/* data length is valid */
if(1U == hit) {
reg_temp |= 9U + i;
} else {
CAN_ERROR_HANDLE("dlen is invalid \r\n");
reg_temp |= (((uint32_t)transmit_message->fd_brs << 5U) | ((uint32_t)transmit_message->fd_esi << 4U) | ((uint32_t)transmit_message->fd_flag << 7U));
CAN_TMP(can_periph, mailbox_number) = reg_temp;
/* set the data */
i = transmit_message->tx_dlen / 4U;
/* data length is 5-7 need send 2 word */
if((1U == i) && (4U != transmit_message->tx_dlen)) {
i++;
}
}
reg_temp |= (((uint32_t)transmit_message->fd_brs << 5U) | ((uint32_t)transmit_message->fd_esi << 4U) | ((uint32_t)transmit_message->fd_flag << 7U));
CAN_TMP(can_periph, mailbox_number) = reg_temp;
/* set the data */
i = transmit_message->tx_dlen / 4U;
/* data length is 5-7 need send 2 word */
if((1U == i) && (4U != transmit_message->tx_dlen)) {
i++;
}
p_temp = (uint32_t)transmit_message->tx_data;
if((0U == i)) {
CAN_TMDATA0(can_periph, mailbox_number) = *(uint32_t *)p_temp;
} else {
for(; i > 0U; i--) {
p_temp = (uint32_t)transmit_message->tx_data;
if((0U == i)) {
CAN_TMDATA0(can_periph, mailbox_number) = *(uint32_t *)p_temp;
p_temp = ((uint32_t)((uint32_t)p_temp + 4U));
} else {
for(; i > 0U; i--) {
CAN_TMDATA0(can_periph, mailbox_number) = *(uint32_t *)p_temp;
p_temp = ((uint32_t)((uint32_t)p_temp + 4U));
}
}
} else {
CAN_ERROR_HANDLE("CAN FD function disabled \r\n");
}
} else {
CAN_ERROR_HANDLE("CAN FD function disabled \r\n");
}
/* enable transmission */
CAN_TMI(can_periph, mailbox_number) |= CAN_TMI_TEN;
}
/* enable transmission */
CAN_TMI(can_periph, mailbox_number) |= CAN_TMI_TEN;
return mailbox_number;
}
@@ -901,25 +900,63 @@ can_transmit_state_enum can_transmit_states(uint32_t can_periph, uint8_t mailbox
only one parameter can be selected which is shown as below:
\arg CAN_MAILBOXx(x=0,1,2)
\param[out] none
\retval none
\retval ErrStatus: ERROR or SUCCESS
*/
void can_transmission_stop(uint32_t can_periph, uint8_t mailbox_number)
ErrStatus can_transmission_stop(uint32_t can_periph, uint8_t mailbox_number)
{
ErrStatus reval = SUCCESS;
/* timeout for CAN_TSTAT_MSTx bits */
uint32_t timeout = CAN_TIMEOUT;
uint32_t reg_value0 = 0U;
uint32_t reg_value1 = 0U;
/* get the status of transmit FIFO order */
reg_value0 = CAN_CTL(can_periph) & CAN_CTL_TFO;
if(CAN_MAILBOX0 == mailbox_number) {
CAN_TSTAT(can_periph) |= CAN_TSTAT_MST0;
while(CAN_TSTAT_MST0 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST0)) {
reg_value1 = CAN_TSTAT(can_periph) & (CAN_TSTAT_TMLS0 | CAN_ALL_MAILBOX_EMPTY);
if((CAN_CTL_TFO == reg_value0) && (CAN_TSTAT_TMLS0 == reg_value1)){
reval = ERROR;
} else {
CAN_TSTAT(can_periph) |= CAN_TSTAT_MST0;
while((CAN_TSTAT_MST0 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST0)) && (0U != timeout)) {
timeout--;
}
if(CAN_TSTAT_MST0 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST0)){
reval = ERROR;
}
}
} else if(CAN_MAILBOX1 == mailbox_number) {
CAN_TSTAT(can_periph) |= CAN_TSTAT_MST1;
while(CAN_TSTAT_MST1 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST1)) {
reg_value1 = CAN_TSTAT(can_periph) & (CAN_TSTAT_TMLS1 | CAN_ALL_MAILBOX_EMPTY);
if((CAN_CTL_TFO == reg_value0) && (CAN_TSTAT_TMLS1 == reg_value1)){
reval = ERROR;
}else{
CAN_TSTAT(can_periph) |= CAN_TSTAT_MST1;
while((CAN_TSTAT_MST1 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST1)) && (0U != timeout)) {
timeout--;
}
if(CAN_TSTAT_MST1 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST1)){
reval = ERROR;
}
}
} else if(CAN_MAILBOX2 == mailbox_number) {
CAN_TSTAT(can_periph) |= CAN_TSTAT_MST2;
while(CAN_TSTAT_MST2 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST2)) {
reg_value1 = CAN_TSTAT(can_periph) & (CAN_TSTAT_TMLS2 | CAN_ALL_MAILBOX_EMPTY);
if((CAN_CTL_TFO == reg_value0) && (CAN_TSTAT_TMLS2 == reg_value1)){
reval = ERROR;
}else{
CAN_TSTAT(can_periph) |= CAN_TSTAT_MST2;
while((CAN_TSTAT_MST2 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST2)) && (0U != timeout)) {
timeout--;
}
if(CAN_TSTAT_MST2 == (CAN_TSTAT(can_periph) & CAN_TSTAT_MST2)){
reval = ERROR;
}
}
} else {
/* illegal parameters */
}
return reval;
}
/*!
@@ -976,13 +1013,10 @@ void can_message_receive(uint32_t can_periph, uint8_t fifo_number, can_receive_m
receive_message->rx_data[5] = (uint8_t)(GET_RFIFOMDATA1_DB5(CAN_RFIFOMDATA1(can_periph, fifo_number)));
receive_message->rx_data[6] = (uint8_t)(GET_RFIFOMDATA1_DB6(CAN_RFIFOMDATA1(can_periph, fifo_number)));
receive_message->rx_data[7] = (uint8_t)(GET_RFIFOMDATA1_DB7(CAN_RFIFOMDATA1(can_periph, fifo_number)));
} else {
printf("CAN FD function disabled but FD frame received\r\n");
// CAN_ERROR_HANDLE("CAN FD function disabled \r\n");
} else {
CAN_ERROR_HANDLE("CAN FD function disabled \r\n");
}
} else {
/* check FD function has been enabled */
/* get receive data length */
canfd_recv_cnt = (uint8_t)(GET_RFIFOMP_DLENC(CAN_RFIFOMP(can_periph, fifo_number)));
@@ -1322,12 +1356,14 @@ void can_interrupt_disable(uint32_t can_periph, uint32_t interrupt)
*/
FlagStatus can_flag_get(uint32_t can_periph, can_flag_enum flag)
{
FlagStatus retval;
/* get flag and interrupt enable state */
if(RESET != (CAN_REG_VAL(can_periph, flag) & BIT(CAN_BIT_POS(flag)))) {
return SET;
retval = SET;
} else {
return RESET;
retval = RESET;
}
return retval;
}
/*!
@@ -1390,6 +1426,7 @@ void can_flag_clear(uint32_t can_periph, can_flag_enum flag)
*/
FlagStatus can_interrupt_flag_get(uint32_t can_periph, can_interrupt_flag_enum flag)
{
FlagStatus retval;
uint32_t ret1 = RESET;
uint32_t ret2 = RESET;
@@ -1406,10 +1443,11 @@ FlagStatus can_interrupt_flag_get(uint32_t can_periph, can_interrupt_flag_enum f
/* get the status of interrupt enable bit */
ret2 = CAN_INTEN(can_periph) & BIT(CAN_BIT_POS1(flag));
if(ret1 && ret2) {
return SET;
retval = SET;
} else {
return RESET;
retval = RESET;
}
return retval;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_crc.c
+4 -4
View File
@@ -2,11 +2,11 @@
\file gd32c10x_crc.c
\brief CRC driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -117,11 +117,11 @@ uint32_t crc_single_data_calculate(uint32_t sdata)
\param[out] none
\retval 32-bit value calculated by CRC
*/
uint32_t crc_block_data_calculate(const uint32_t *array, uint32_t size)
uint32_t crc_block_data_calculate(uint32_t array[], uint32_t size)
{
uint32_t index;
for(index = 0U; index < size; index++){
CRC_DATA = *(array+index);
CRC_DATA = array[index];
}
return (CRC_DATA);
}
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_ctc.c
+18 -10
View File
@@ -2,11 +2,11 @@
\file gd32c10x_ctc.c
\brief CTC driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -79,7 +79,7 @@ void ctc_counter_disable(void)
/*!
\brief configure the IRC48M trim value
\param[in] ctc_trim_value: 8-bit IRC48M trim value
\param[in] trim_value: 8-bit IRC48M trim value
\arg 0x00 - 0x3F
\param[out] none
\retval none
@@ -218,11 +218,14 @@ uint16_t ctc_counter_capture_value_read(void)
*/
FlagStatus ctc_counter_direction_read(void)
{
FlagStatus ret;
if(RESET != (CTC_STAT & CTC_STAT_REFDIR)){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
@@ -300,7 +303,8 @@ void ctc_interrupt_disable(uint32_t interrupt)
FlagStatus ctc_interrupt_flag_get(uint32_t interrupt)
{
uint32_t intflag = 0U, intenable = 0U;
FlagStatus ret;
/* check whether the interrupt is enabled */
if(RESET != (interrupt & CTC_FLAG_MASK)){
intenable = CTC_CTL0 & CTC_CTL0_ERRIE;
@@ -312,10 +316,11 @@ FlagStatus ctc_interrupt_flag_get(uint32_t interrupt)
intflag = CTC_STAT & interrupt;
if(intflag && intenable){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
@@ -357,11 +362,14 @@ void ctc_interrupt_flag_clear(uint32_t interrupt)
*/
FlagStatus ctc_flag_get(uint32_t flag)
{
FlagStatus ret;
if(RESET != (CTC_STAT & flag)){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_dac.c
+3 -2
View File
@@ -2,11 +2,11 @@
\file gd32c10x_dac.c
\brief DAC driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -318,6 +318,7 @@ void dac_trigger_source_config(uint32_t dac_periph, uint8_t dac_out, uint32_t tr
\brief enable DAC software trigger
\param[in] dac_periph: DACx(x=0)
\param[in] dac_out: DAC_OUTx(x=0,1)
\param[out] none
\retval none
*/
void dac_software_trigger_enable(uint32_t dac_periph, uint8_t dac_out)
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_dbg.c
+2 -2
View File
@@ -2,11 +2,11 @@
\file gd32c10x_dbg.c
\brief DBG driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_dma.c
+6 -4
View File
@@ -2,11 +2,11 @@
\file gd32c10x_dma.c
\brief DMA driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -614,6 +614,7 @@ void dma_flag_clear(uint32_t dma_periph, dma_channel_enum channelx, uint32_t fla
FlagStatus dma_interrupt_flag_get(uint32_t dma_periph, dma_channel_enum channelx, uint32_t flag)
{
uint32_t interrupt_enable = 0U, interrupt_flag = 0U;
FlagStatus status = RESET;
switch(flag){
case DMA_INT_FLAG_FTF:
@@ -637,10 +638,11 @@ FlagStatus dma_interrupt_flag_get(uint32_t dma_periph, dma_channel_enum channelx
/* when the interrupt flag is set and enabled, return SET */
if((0U != interrupt_flag) && (0U != interrupt_enable)){
return SET;
status = SET;
}else{
return RESET;
status = RESET;
}
return status;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_exmc.c
+2 -2
View File
@@ -2,11 +2,11 @@
\file gd32c10x_exmc.c
\brief EXMC driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_exti.c
+12 -6
View File
@@ -2,11 +2,11 @@
\file gd32c10x_exti.c
\brief EXTI driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -196,11 +196,14 @@ void exti_software_interrupt_disable(exti_line_enum linex)
*/
FlagStatus exti_flag_get(exti_line_enum linex)
{
FlagStatus ret;
if(RESET != (EXTI_PD & (uint32_t)linex)) {
return SET;
ret = SET;
} else {
return RESET;
ret = RESET;
}
return ret;
}
/*!
@@ -226,11 +229,14 @@ void exti_flag_clear(exti_line_enum linex)
*/
FlagStatus exti_interrupt_flag_get(exti_line_enum linex)
{
FlagStatus ret;
if(RESET != (EXTI_PD & (uint32_t)linex)) {
return SET;
ret = SET;
} else {
return RESET;
ret = RESET;
}
return ret;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_fmc.c
+13 -10
View File
@@ -2,11 +2,11 @@
\file gd32c10x_fmc.c
\brief FMC driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -33,7 +33,6 @@ OF SUCH DAMAGE.
*/
#include "gd32c10x_fmc.h"
#include "stdio.h"
/* FMC mask */
#define LOW_8BITS_MASK ((uint32_t)0x000000FFU)
@@ -508,7 +507,7 @@ fmc_state_enum ob_write_protection_enable(uint32_t ob_wp)
*/
fmc_state_enum ob_security_protection_config(uint8_t ob_spc)
{
uint8_t i;
uint32_t i;
uint32_t op_byte[4];
fmc_state_enum fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
for(i = 0U; i < 4U; i++){
@@ -574,7 +573,7 @@ fmc_state_enum ob_security_protection_config(uint8_t ob_spc)
*/
fmc_state_enum ob_user_write(uint8_t ob_fwdgt, uint8_t ob_deepsleep, uint8_t ob_stdby)
{
uint8_t i;
uint32_t i;
uint32_t temp;
uint32_t op_byte[4];
fmc_state_enum fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
@@ -582,7 +581,7 @@ fmc_state_enum ob_user_write(uint8_t ob_fwdgt, uint8_t ob_deepsleep, uint8_t ob_
for(i = 0U; i < 4U; i++){
op_byte[i] = OP_BYTE(i);
}
temp = ((uint8_t)((uint8_t)((uint8_t)(ob_fwdgt) | ob_deepsleep) | ob_stdby) | (OB_USER_MASK));
temp = (uint32_t)(((uint32_t)((uint32_t)(ob_fwdgt) | ob_deepsleep) | ob_stdby) | OB_USER_MASK);
op_byte[0] = ((uint32_t)(temp) << 16U) | ((op_byte[0] & LOW_16BITS_MASK));
if(FMC_READY == fmc_state){
@@ -632,7 +631,7 @@ fmc_state_enum ob_user_write(uint8_t ob_fwdgt, uint8_t ob_deepsleep, uint8_t ob_
fmc_state_enum ob_data_program(uint16_t ob_data)
{
uint8_t i;
uint32_t i;
uint32_t op_byte[4];
fmc_state_enum fmc_state = fmc_ready_wait(FMC_TIMEOUT_COUNT);
for(i = 0U; i < 4U; i++){
@@ -774,17 +773,21 @@ void fmc_ecc_interrupt_disable(uint32_t interrupt)
FlagStatus fmc_ecc_interrupt_flag_get(uint32_t int_flag)
{
uint32_t intenable = 0U, flagstatus = 0U;
FlagStatus status = RESET;
/* get the interrupt enable bit status */
intenable = (FMC_REG_VAL(int_flag) & BIT(FMC_BIT_POS(int_flag)));
/* get the corresponding flag bit status */
flagstatus = (FMC_REG_VAL2(int_flag) & BIT(FMC_BIT_POS2(int_flag)));
if(flagstatus && intenable) {
return SET;
status = SET;
} else {
return RESET;
status = RESET;
}
/* return the state of corresponding FMC interrupt flag */
return status;
}
/*!
@@ -989,7 +992,7 @@ void fmc_interrupt_flag_clear(uint32_t flag)
static fmc_state_enum fmc_state_get(void)
{
fmc_state_enum fmc_state = FMC_READY;
if((uint32_t)0x00U != (FMC_STAT & FMC_STAT_BUSY)){
fmc_state = FMC_BUSY;
}else{
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_fwdgt.c
+54 -41
View File
@@ -2,11 +2,11 @@
\file gd32c10x_fwdgt.c
\brief FWDGT driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -84,24 +84,25 @@ void fwdgt_enable(void)
ErrStatus fwdgt_prescaler_value_config(uint16_t prescaler_value)
{
uint32_t timeout = FWDGT_PSC_TIMEOUT;
uint32_t flag_status = RESET;
uint32_t flag_status;
ErrStatus status = SUCCESS;
/* enable write access to FWDGT_PSC */
FWDGT_CTL = FWDGT_WRITEACCESS_ENABLE;
/* configure FWDGT_PSC */
FWDGT_PSC = (uint32_t)prescaler_value;
/* wait until the PUD flag to be reset */
do {
flag_status = FWDGT_STAT & FWDGT_STAT_PUD;
} while((--timeout > 0U) && ((uint32_t)RESET != flag_status));
} while((--timeout > 0U) && (0U != flag_status));
if((uint32_t)RESET != flag_status) {
return ERROR;
if(0U != flag_status) {
status = ERROR;
}
/* configure FWDGT */
FWDGT_PSC = (uint32_t)prescaler_value;
return SUCCESS;
return status;
}
/*!
@@ -113,23 +114,25 @@ ErrStatus fwdgt_prescaler_value_config(uint16_t prescaler_value)
ErrStatus fwdgt_reload_value_config(uint16_t reload_value)
{
uint32_t timeout = FWDGT_RLD_TIMEOUT;
uint32_t flag_status = RESET;
uint32_t flag_status;
ErrStatus status = SUCCESS;
/* enable write access to FWDGT_RLD */
FWDGT_CTL = FWDGT_WRITEACCESS_ENABLE;
/* configure FWDGT_RLD */
FWDGT_RLD = RLD_RLD(reload_value);
/* wait until the RUD flag to be reset */
do {
flag_status = FWDGT_STAT & FWDGT_STAT_RUD;
} while((--timeout > 0U) && ((uint32_t)RESET != flag_status));
} while((--timeout > 0U) && (0U != flag_status));
if((uint32_t)RESET != flag_status) {
return ERROR;
if(0U != flag_status) {
status = ERROR;
}
FWDGT_RLD = RLD_RLD(reload_value);
return SUCCESS;
return status;
}
/*!
@@ -146,7 +149,7 @@ void fwdgt_counter_reload(void)
/*!
\brief configure counter reload value, and prescaler divider value
\param[in] reload_value: specify reload value(0x0000 - 0x0FFF)
\param[in] prescaler_div: FWDGT prescaler value
\param[in] prescaler_value: FWDGT prescaler value
only one parameter can be selected which is shown as below:
\arg FWDGT_PSC_DIV4: FWDGT prescaler set to 4
\arg FWDGT_PSC_DIV8: FWDGT prescaler set to 8
@@ -158,42 +161,51 @@ void fwdgt_counter_reload(void)
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus fwdgt_config(uint16_t reload_value, uint8_t prescaler_div)
ErrStatus fwdgt_config(uint16_t reload_value, uint8_t prescaler_value)
{
uint32_t timeout = FWDGT_PSC_TIMEOUT;
uint32_t flag_status = RESET;
uint32_t flag_status;
ErrStatus status = SUCCESS;
/* start the free watchdog timer counter */
FWDGT_CTL = FWDGT_KEY_ENABLE;
/* enable write access to FWDGT_PSC,and FWDGT_RLD */
FWDGT_CTL = FWDGT_WRITEACCESS_ENABLE;
/* configure FWDGT_PSC */
FWDGT_PSC = (uint32_t)prescaler_value;
/* wait until the PUD flag to be reset */
do {
flag_status = FWDGT_STAT & FWDGT_STAT_PUD;
} while((--timeout > 0U) && ((uint32_t)RESET != flag_status));
} while((--timeout > 0U) && (0U != flag_status));
if((uint32_t)RESET != flag_status) {
return ERROR;
if(0U != flag_status) {
status = ERROR;
}
/* configure FWDGT */
FWDGT_PSC = (uint32_t)prescaler_div;
if(SUCCESS == status) {
/* configure FWDGT_RLD */
FWDGT_RLD = RLD_RLD(reload_value);
timeout = FWDGT_RLD_TIMEOUT;
/* wait until the RUD flag to be reset */
do {
flag_status = FWDGT_STAT & FWDGT_STAT_RUD;
} while((--timeout > 0U) && ((uint32_t)RESET != flag_status));
/* wait until the RUD flag to be reset */
timeout = FWDGT_RLD_TIMEOUT;
do {
flag_status = FWDGT_STAT & FWDGT_STAT_RUD;
} while((--timeout > 0U) && (0U != flag_status));
if((uint32_t)RESET != flag_status) {
return ERROR;
if(0U != flag_status) {
status = ERROR;
}
}
FWDGT_RLD = RLD_RLD(reload_value);
if(SUCCESS == status) {
/* reload the counter */
FWDGT_CTL = FWDGT_KEY_RELOAD;
}
/* reload the counter */
FWDGT_CTL = FWDGT_KEY_RELOAD;
return SUCCESS;
return status;
}
/*!
@@ -207,9 +219,10 @@ ErrStatus fwdgt_config(uint16_t reload_value, uint8_t prescaler_div)
*/
FlagStatus fwdgt_flag_get(uint16_t flag)
{
if(FWDGT_STAT & flag) {
return SET;
}
FlagStatus flag_status = RESET;
return RESET;
if(RESET != (FWDGT_STAT & flag)) {
flag_status = SET;
}
return flag_status;
}
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_gpio.c
+14 -8
View File
@@ -2,11 +2,11 @@
\file gd32c10x_gpio.c
\brief GPIO driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -264,11 +264,13 @@ void gpio_port_write(uint32_t gpio_periph,uint16_t data)
*/
FlagStatus gpio_input_bit_get(uint32_t gpio_periph,uint32_t pin)
{
FlagStatus status = RESET;
if((uint32_t)RESET != (GPIO_ISTAT(gpio_periph)&(pin))){
return SET;
status = SET;
}else{
return RESET;
status = RESET;
}
return status;
}
/*!
@@ -293,11 +295,13 @@ uint16_t gpio_input_port_get(uint32_t gpio_periph)
*/
FlagStatus gpio_output_bit_get(uint32_t gpio_periph, uint32_t pin)
{
FlagStatus status = RESET;
if((uint32_t)RESET !=(GPIO_OCTL(gpio_periph)&(pin))){
return SET;
status = SET;
}else{
return RESET;
status = RESET;
}
return status;
}
/*!
@@ -530,9 +534,11 @@ void gpio_compensation_config(uint32_t compensation)
*/
FlagStatus gpio_compensation_flag_get(void)
{
FlagStatus status = RESET;
if(((uint32_t)RESET) != (AFIO_CPSCTL & AFIO_CPSCTL_CPS_RDY)){
return SET;
status = SET;
}else{
return RESET;
status = RESET;
}
return status;
}
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_i2c.c
+10 -6
View File
@@ -2,11 +2,11 @@
\file gd32c10x_i2c.c
\brief I2C driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -635,11 +635,13 @@ void i2c_sam_timeout_disable(uint32_t i2c_periph)
*/
FlagStatus i2c_flag_get(uint32_t i2c_periph, i2c_flag_enum flag)
{
FlagStatus status = RESET;
if(RESET != (I2C_REG_VAL(i2c_periph, flag) & BIT(I2C_BIT_POS(flag)))){
return SET;
status = SET;
}else{
return RESET;
status = RESET;
}
return status;
}
/*!
@@ -742,6 +744,7 @@ void i2c_interrupt_disable(uint32_t i2c_periph, i2c_interrupt_enum interrupt)
FlagStatus i2c_interrupt_flag_get(uint32_t i2c_periph, i2c_interrupt_flag_enum int_flag)
{
uint32_t intenable = 0U, flagstatus = 0U, bufie;
FlagStatus status = RESET;
/* check BUFIE */
bufie = I2C_CTL1(i2c_periph)&I2C_CTL1_BUFIE;
@@ -759,10 +762,11 @@ FlagStatus i2c_interrupt_flag_get(uint32_t i2c_periph, i2c_interrupt_flag_enum i
}
}
if((0U != flagstatus) && (0U != intenable)){
return SET;
status = SET;
}else{
return RESET;
status = RESET;
}
return status;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_misc.c
+14 -28
View File
@@ -2,11 +2,11 @@
\file gd32c10x_misc.c
\brief MISC driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -63,45 +63,31 @@ void nvic_irq_enable(IRQn_Type nvic_irq,
uint8_t nvic_irq_pre_priority,
uint8_t nvic_irq_sub_priority)
{
uint32_t temp_priority = 0x00U, temp_pre = 0x00U, temp_sub = 0x00U;
uint32_t nvic_prigroup, nvic_priority;
/* use the priority group value to get the temp_pre and the temp_sub */
switch((SCB->AIRCR) & (uint32_t)0x700U) {
/* check current priority group */
switch(SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) {
case NVIC_PRIGROUP_PRE0_SUB4:
temp_pre = 0U;
temp_sub = 0x4U;
break;
case NVIC_PRIGROUP_PRE1_SUB3:
temp_pre = 1U;
temp_sub = 0x3U;
break;
case NVIC_PRIGROUP_PRE2_SUB2:
temp_pre = 2U;
temp_sub = 0x2U;
break;
case NVIC_PRIGROUP_PRE3_SUB1:
temp_pre = 3U;
temp_sub = 0x1U;
break;
case NVIC_PRIGROUP_PRE4_SUB0:
temp_pre = 4U;
temp_sub = 0x0U;
break;
default:
nvic_priority_group_set(NVIC_PRIGROUP_PRE2_SUB2);
temp_pre = 2U;
temp_sub = 0x2U;
break;
}
/* get the temp_priority to fill the NVIC->IP register */
temp_priority = (uint32_t)nvic_irq_pre_priority << (0x4U - temp_pre);
temp_priority |= nvic_irq_sub_priority & (0x0FU >> (0x4U - temp_sub));
temp_priority = temp_priority << 0x04U;
NVIC->IP[nvic_irq] = (uint8_t)temp_priority;
/* get the priority group value */
nvic_prigroup = NVIC_GetPriorityGrouping();
/* encoding the pre-emption, subpriority priority */
nvic_priority = NVIC_EncodePriority(nvic_prigroup, (uint32_t)nvic_irq_pre_priority, (uint32_t)nvic_irq_sub_priority);
/* set priority */
NVIC_SetPriority(nvic_irq, nvic_priority);
/* enable the selected IRQ */
NVIC->ISER[nvic_irq >> 0x05U] = (uint32_t)0x01U << (nvic_irq & (uint8_t)0x1FU);
NVIC_EnableIRQ(nvic_irq);
}
/*!
@@ -113,7 +99,7 @@ void nvic_irq_enable(IRQn_Type nvic_irq,
void nvic_irq_disable(IRQn_Type nvic_irq)
{
/* disable the selected IRQ.*/
NVIC->ICER[nvic_irq >> 0x05U] = (uint32_t)0x01U << (nvic_irq & (uint8_t)0x1FU);
NVIC->ICER[(uint32_t)nvic_irq >> 0x05U] = (uint32_t)0x01U << ((uint32_t)nvic_irq & (uint8_t)0x1FU);
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_pmu.c
+7 -4
View File
@@ -2,11 +2,11 @@
\file gd32c10x_pmu.c
\brief PMU driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -261,11 +261,14 @@ void pmu_backup_write_disable(void)
*/
FlagStatus pmu_flag_get(uint32_t flag)
{
FlagStatus ret;
if(RESET != (PMU_CS & flag)){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_rcu.c
+15 -7
View File
@@ -2,11 +2,11 @@
\file gd32c10x_rcu.c
\brief RCU driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -565,7 +565,7 @@ void rcu_adc_clock_config(uint32_t adc_psc)
/*!
\brief configure the USBFS prescaler factor
\param[in] adc_div: USB prescaler factor
\param[in] usb_psc: USB prescaler factor
only one parameter can be selected which is shown as below:
\arg RCU_CKUSB_CKPLL_DIV1_5: USBFS prescaler select CK_PLL/1.5
\arg RCU_CKUSB_CKPLL_DIV1: USBFS prescaler select CK_PLL/1
@@ -690,12 +690,16 @@ void rcu_ck48m_clock_config(uint32_t ck48m_clock_source)
*/
FlagStatus rcu_flag_get(rcu_flag_enum flag)
{
FlagStatus rcu_flag = RESET;
/* get the rcu flag */
if(RESET != (RCU_REG_VAL(flag) & BIT(RCU_BIT_POS(flag)))){
return SET;
rcu_flag = SET;
}else{
return RESET;
rcu_flag = RESET;
}
return rcu_flag;
}
/*!
@@ -727,12 +731,16 @@ void rcu_all_reset_flag_clear(void)
*/
FlagStatus rcu_interrupt_flag_get(rcu_int_flag_enum int_flag)
{
FlagStatus rcu_int_flag = RESET;
/* get the rcu interrupt flag */
if(RESET != (RCU_REG_VAL(int_flag) & BIT(RCU_BIT_POS(int_flag)))){
return SET;
rcu_int_flag = SET;
}else{
return RESET;
rcu_int_flag = RESET;
}
return rcu_int_flag;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_rtc.c
+12 -6
View File
@@ -2,11 +2,11 @@
\file gd32c10x_rtc.c
\brief RTC driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -191,11 +191,14 @@ uint32_t rtc_divider_get(void)
*/
FlagStatus rtc_flag_get(uint32_t flag)
{
FlagStatus ret;
if(RESET != (RTC_CTL & flag)){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
@@ -227,11 +230,14 @@ void rtc_flag_clear(uint32_t flag)
*/
FlagStatus rtc_interrupt_flag_get(uint32_t flag)
{
FlagStatus ret;
if(RESET != (RTC_CTL & flag)){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_spi.c
+17 -30
View File
@@ -2,11 +2,11 @@
\file gd32c10x_spi.c
\brief SPI driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -564,11 +564,14 @@ void spi_crc_next(uint32_t spi_periph)
*/
uint16_t spi_crc_get(uint32_t spi_periph,uint8_t crc)
{
uint16_t crc_value;
if(SPI_CRC_TX == crc){
return ((uint16_t)(SPI_TCRC(spi_periph)));
crc_value = ((uint16_t)(SPI_TCRC(spi_periph)));
}else{
return ((uint16_t)(SPI_RCRC(spi_periph)));
crc_value = ((uint16_t)(SPI_RCRC(spi_periph)));
}
return crc_value;
}
/*!
@@ -670,28 +673,6 @@ void spi_quad_read_enable(uint32_t spi_periph)
SPI_QCTL(spi_periph) |= (uint32_t)SPI_QCTL_QRD;
}
/*!
\brief enable SPI quad wire mode SPI_IO2 and SPI_IO3 pin output
\param[in] spi_periph: SPIx(only x=0)
\param[out] none
\retval none
*/
void spi_quad_io23_output_enable(uint32_t spi_periph)
{
SPI_QCTL(spi_periph) |= (uint32_t)SPI_QCTL_IO23_DRV;
}
/*!
\brief disable SPI quad wire mode SPI_IO2 and SPI_IO3 pin output
\param[in] spi_periph: SPIx(only x=0)
\param[out] none
\retval none
*/
void spi_quad_io23_output_disable(uint32_t spi_periph)
{
SPI_QCTL(spi_periph) &= (uint32_t)(~SPI_QCTL_IO23_DRV);
}
/*!
\brief enable SPI and I2S interrupt
\param[in] spi_periph: SPIx(x=0,1,2)
@@ -773,6 +754,7 @@ void spi_i2s_interrupt_disable(uint32_t spi_periph, uint8_t interrupt)
*/
FlagStatus spi_i2s_interrupt_flag_get(uint32_t spi_periph, uint8_t interrupt)
{
FlagStatus status = RESET;
uint32_t reg1 = SPI_STAT(spi_periph);
uint32_t reg2 = SPI_CTL1(spi_periph);
@@ -817,10 +799,12 @@ FlagStatus spi_i2s_interrupt_flag_get(uint32_t spi_periph, uint8_t interrupt)
}
/* get SPI/I2S interrupt flag status */
if((0U != reg1) && (0U != reg2)){
return SET;
status = SET;
}else{
return RESET;
status = RESET;
}
return status;
}
/*!
@@ -847,9 +831,12 @@ FlagStatus spi_i2s_interrupt_flag_get(uint32_t spi_periph, uint8_t interrupt)
*/
FlagStatus spi_i2s_flag_get(uint32_t spi_periph, uint32_t flag)
{
FlagStatus status = RESET;
if(RESET != (SPI_STAT(spi_periph) & flag)){
return SET;
status = SET;
}else{
return RESET;
status = RESET;
}
return status;
}
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_timer.c
+10 -6
View File
@@ -2,11 +2,11 @@
\file gd32c10x_timer.c
\brief TIMER driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -1955,12 +1955,14 @@ void timer_interrupt_disable(uint32_t timer_periph, uint32_t interrupt)
FlagStatus timer_interrupt_flag_get(uint32_t timer_periph, uint32_t interrupt)
{
uint32_t val;
FlagStatus ret;
val = (TIMER_DMAINTEN(timer_periph) & interrupt);
if((RESET != (TIMER_INTF(timer_periph) & interrupt)) && (RESET != val)){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
@@ -2006,11 +2008,13 @@ void timer_interrupt_flag_clear(uint32_t timer_periph, uint32_t interrupt)
*/
FlagStatus timer_flag_get(uint32_t timer_periph, uint32_t flag)
{
FlagStatus ret;
if(RESET != (TIMER_INTF(timer_periph) & flag)){
return SET;
ret = SET;
}else{
return RESET;
ret = RESET;
}
return ret;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_usart.c
+11 -6
View File
@@ -2,11 +2,11 @@
\file gd32c10x_usart.c
\brief USART driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -757,11 +757,14 @@ void usart_hardware_flow_coherence_config(uint32_t usart_periph, uint32_t hcm)
*/
FlagStatus usart_flag_get(uint32_t usart_periph, usart_flag_enum flag)
{
FlagStatus ret;
if(RESET != (USART_REG_VAL(usart_periph, flag) & BIT(USART_BIT_POS(flag)))) {
return SET;
ret = SET;
} else {
return RESET;
ret = RESET;
}
return ret;
}
/*!
@@ -858,16 +861,18 @@ void usart_interrupt_disable(uint32_t usart_periph, usart_interrupt_enum interru
FlagStatus usart_interrupt_flag_get(uint32_t usart_periph, usart_interrupt_flag_enum int_flag)
{
uint32_t intenable = 0U, flagstatus = 0U;
FlagStatus ret;
/* get the interrupt enable bit status */
intenable = (USART_REG_VAL(usart_periph, int_flag) & BIT(USART_BIT_POS(int_flag)));
/* get the corresponding flag bit status */
flagstatus = (USART_REG_VAL2(usart_periph, int_flag) & BIT(USART_BIT_POS2(int_flag)));
if((0U != flagstatus) && (0U != intenable)) {
return SET;
ret = SET;
} else {
return RESET;
ret = RESET;
}
return ret;
}
/*!
Robot_V2/RTE/Device/GD32C103CB/gd32c10x_wwdgt.c
+6 -4
View File
@@ -2,11 +2,11 @@
\file gd32c10x_wwdgt.c
\brief WWDGT driver
\version 2025-08-07, V1.6.0, firmware for GD32C10x
\version 2026-01-30, V1.7.0, firmware for GD32C10x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Copyright (c) 2026, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -95,11 +95,13 @@ void wwdgt_config(uint16_t counter, uint16_t window, uint32_t prescaler)
*/
FlagStatus wwdgt_flag_get(void)
{
FlagStatus flag_status = RESET;
if(RESET != (WWDGT_STAT & WWDGT_STAT_EWIF)) {
return SET;
flag_status = SET;
}
return RESET;
return flag_status;
}
/*!
Robot_V2/RTE/_Release_GD32C103CB/RTE_Components.h
+19 -19
View File
@@ -1,6 +1,6 @@
/*
* CSOLUTION generated file: DO NOT EDIT!
* Generated by: csolution version 2.12.0+p41-gfeadfc5e
* Generated by: csolution version 2.13.0+p3-g40b6564e
*
* Project: 'Robot_V2.Release+GD32C103CB'
* Target: 'Release+GD32C103CB'
@@ -15,41 +15,41 @@
*/
#define CMSIS_device_header "gd32c10x.h"
/* GigaDevice::Device:GD32C10x_StdPeripherals:ADC@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:ADC@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_ADC
/* GigaDevice::Device:GD32C10x_StdPeripherals:BKP@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:BKP@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_BKP
/* GigaDevice::Device:GD32C10x_StdPeripherals:CAN@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:CAN@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_CAN
/* GigaDevice::Device:GD32C10x_StdPeripherals:CRC@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:CRC@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_CRC
/* GigaDevice::Device:GD32C10x_StdPeripherals:DBG@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:DBG@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_DBG
/* GigaDevice::Device:GD32C10x_StdPeripherals:DMA@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:DMA@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_DMA
/* GigaDevice::Device:GD32C10x_StdPeripherals:EXTI@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:EXTI@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_EXTI
/* GigaDevice::Device:GD32C10x_StdPeripherals:FMC@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:FMC@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_FMC
/* GigaDevice::Device:GD32C10x_StdPeripherals:FWDGT@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:FWDGT@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_FWDGT
/* GigaDevice::Device:GD32C10x_StdPeripherals:GPIO@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:GPIO@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_GPIO
/* GigaDevice::Device:GD32C10x_StdPeripherals:MISC@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:MISC@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_MISC
/* GigaDevice::Device:GD32C10x_StdPeripherals:PMU@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:PMU@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_PMU
/* GigaDevice::Device:GD32C10x_StdPeripherals:RCU@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:RCU@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_RCU
/* GigaDevice::Device:GD32C10x_StdPeripherals:RTC@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:RTC@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_RTC
/* GigaDevice::Device:GD32C10x_StdPeripherals:SPI_I2S@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:SPI_I2S@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_SPI
/* GigaDevice::Device:GD32C10x_StdPeripherals:TIMER@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:TIMER@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_TIMER
/* GigaDevice::Device:GD32C10x_StdPeripherals:USART@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:USART@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_USART
/* GigaDevice::Device:GD32C10x_StdPeripherals:WWDGT@1.0.0 */
/* GigaDevice::Device:GD32C10x_StdPeripherals:WWDGT@1.3.0 */
#define RTE_DEVICE_STDPERIPHERALS_WWDGT
Robot_V2/Robot_V2.cproject.yml
+2 -1
View File
@@ -59,7 +59,7 @@ project:
- component: Device:GD32C10x_StdPeripherals:BKP
- component: Device:GD32C10x_StdPeripherals:CRC
- component: Device:GD32C10x_StdPeripherals:RTC
- component: CMSIS:DSP
- component: CMSIS:DSP&Source
output:
type:
- elf
@@ -69,6 +69,7 @@ project:
packs:
- pack: ARM::CMSIS
- pack: GigaDevice::GD32C10x_DFP
- pack: ARM::CMSIS-DSP
misc:
- for-compiler: AC6
C-CPP:
Robot_V2/device/ang_sensor.cpp
-1
View File
@@ -6,7 +6,6 @@
#include "gd32c10x_dma.h"
#include "gd32c10x_gpio.h"
#include "gd32c10x_spi.h"
#include <cmath>
#include <cstdio>
#include <cstring>
#include <stdint.h>
Robot_V2/sys/health.cpp
-1
View File
@@ -4,7 +4,6 @@
#include "FOC.h"
#include "adc.h"
#include "flash.h"
#include "systick.h"
extern sampler sampler;
Robot_V2/sys/systick.cpp
-3
View File
@@ -35,12 +35,9 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include "systick.h"
#include "Can.h"
#include "config.h"
#include "core_cmFunc.h"
#include "flash.h"
#include "gd32c10x.h"
#include "gd32c10x_exti.h"
#include "gd32c10x_fmc.h"
#include "initial.h"
#include "motor.h"
#include <cstdio>