小龙虾
7bb28cee1e
- 新增health_monitor模块，包含温度、电压、WiFi RSSI监控功能 - 移除旧的app_main.h/app_main.c和debug模块，将调试日志移动到monitor目录 - 在main.cpp中替换system_monitor_task为health_monitor_task - 更新CMakeLists.txt依赖项，添加esp_driver_tsens和esp_driver_uart - 修改WiFi配置参数，更新SSID和密码设置方式 - 在Python工具中修复OTA客户端重新连接逻辑 - 调整任务优先级分配，统一使用核心0以适配ESP32-C3单核架构
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
|---|
Wi-Fi SoftAP Example
(See the README.md file in the upper level 'examples' directory for more information about examples.)
This example shows how to use the Wi-Fi SoftAP functionality of the Wi-Fi driver of ESP for serving as an Access Point.
How to use example
SoftAP supports Protected Management Frames(PMF). Necessary configurations can be set using pmf flags. Please refer Wifi-Security for more info.
Configure the project
Open the project configuration menu (idf.py menuconfig).
In the Example Configuration menu:
- Set the Wi-Fi configuration.
- Set
WiFi SSID. - Set
WiFi Password.
- Set
Optional: If you need, change the other options according to your requirements.
Build and Flash
Build the project and flash it to the board, then run the monitor tool to view the serial output:
Run idf.py -p PORT flash monitor to build, flash and monitor the project.
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.
- ESP-IDF Getting Started Guide on ESP32
- ESP-IDF Getting Started Guide on ESP32-S2
- ESP-IDF Getting Started Guide on ESP32-C3
Example Output
There is the console output for this example:
I (917) phy: phy_version: 3960, 5211945, Jul 18 2018, 10:40:07, 0, 0
I (917) wifi: mode : softAP (30:ae:a4:80:45:69)
I (917) wifi softAP: wifi_init_softap finished.SSID:myssid password:mypassword
I (26457) wifi: n:1 0, o:1 0, ap:1 1, sta:255 255, prof:1
I (26457) wifi: station: 70:ef:00:43:96:67 join, AID=1, bg, 20
I (26467) wifi softAP: station:70:ef:00:43:96:67 join, AID=1
I (27657) esp_netif_lwip: DHCP server assigned IP to a station, IP is: 192.168.4.2
Running the example on ESP Chips without Wi-Fi
This example can run on ESP Chips without Wi-Fi using ESP-Hosted. See the Two-Chip Solution section in the upper level README.md for information.
Troubleshooting
For any technical queries, please open an issue on GitHub. We will get back to you soon.