小龙虾
5b2c5f8ff9
- 调整ESP32_COMM/finalize函数执行顺序：先进行SHA-256校验比对， 再调用esp_ota_end和设置启动分区 - 更新BLE传输收尾描述，明确设备端读回OTA分区进行SHA比对的流程， 以及FINISH事件的上报机制
130 lines
6.4 KiB
C++
130 lines
6.4 KiB
C++
/*
|
||
* app_config.h - 统一配置文件（C++ 版本）
|
||
* ESP32-C3 OTA 中继项目
|
||
*
|
||
* 使用 constexpr 代替 #define，提供类型安全
|
||
* 版本号和编译时间由 version.h 自动生成
|
||
*/
|
||
#pragma once
|
||
#include <cstdint>
|
||
#include "freertos/FreeRTOS.h"
|
||
#include "version.h"
|
||
|
||
// ============================================================
|
||
// 固件版本（由 version.h 自动生成，此处提供 C++ constexpr 访问）
|
||
// ============================================================
|
||
inline constexpr const char *FW_VERSION = FW_VERSION_STRING;
|
||
inline constexpr const char *FW_BUILD_TIME = BUILD_TIME;
|
||
inline constexpr const char *FW_GIT_HASH = GIT_HASH;
|
||
|
||
// ============================================================
|
||
// WiFi 工作模式选择
|
||
// ============================================================
|
||
// 0 = AP 模式（设备当热点）
|
||
// 1 = STA 模式（连接路由器）
|
||
inline constexpr uint8_t CONFIG_WIFI_MODE = 1;
|
||
|
||
// ============================================================
|
||
// WiFi STA 模式配置（连接路由器）
|
||
// ============================================================
|
||
inline constexpr const char* WIFI_STA_SSID = "004舰桥";
|
||
inline constexpr const char* WIFI_STA_PASSWORD = "q13362875622";
|
||
inline constexpr uint32_t WIFI_STA_CONNECT_TIMEOUT_MS = 30000;
|
||
inline constexpr uint8_t WIFI_STA_MAX_RETRY = 5; // 最大重连次数，超过后切换 AP 模式
|
||
|
||
// STA 静态 IP
|
||
inline constexpr uint8_t WIFI_STA_USE_STATIC_IP = 0; // 先关闭静态 IP，使用 DHCP 排查连接问题
|
||
|
||
// 静态 IP 配置（始终定义，由 WIFI_STA_USE_STATIC_IP 在运行时决定是否使用）
|
||
inline constexpr const char* WIFI_STA_STATIC_IP = "192.168.31.32";
|
||
inline constexpr const char* WIFI_STA_STATIC_GW = "192.168.31.1";
|
||
inline constexpr const char* WIFI_STA_STATIC_NETMASK = "255.255.255.0";
|
||
inline constexpr const char* WIFI_STA_STATIC_DNS = "192.168.31.1";
|
||
|
||
// ============================================================
|
||
// WiFi AP 模式配置（设备当热点）
|
||
// ============================================================
|
||
inline constexpr const char* WIFI_AP_SSID = "ESP32_OTA_RELAY";
|
||
inline constexpr const char* WIFI_AP_PASSWORD = "12345678";
|
||
inline constexpr uint8_t WIFI_AP_CHANNEL = 6;
|
||
inline constexpr uint8_t WIFI_AP_MAX_CONNECT = 4;
|
||
|
||
// ============================================================
|
||
// HTTP 服务器配置
|
||
// ============================================================
|
||
inline constexpr uint16_t HTTP_SERVER_PORT = 80;
|
||
inline constexpr uint32_t HTTP_SERVER_STACK_SIZE = 8192;
|
||
|
||
// ============================================================
|
||
// OTA 配置
|
||
// ============================================================
|
||
inline constexpr size_t OTA_BLOCK_SIZE = 8192;
|
||
inline constexpr size_t OTA_MAX_FIRMWARE_SIZE = 216 * 1024; // 216KB，对齐 GD32 APP_MAX_SIZE (0x36000)
|
||
inline constexpr size_t GD32_OTA_PACKET_SIZE = 48; // GD32 OTA 实际转发包载荷
|
||
inline constexpr uint32_t OTA_POLL_RETRIES = 40; // 每包 ACK 轮询次数
|
||
inline constexpr uint32_t OTA_RESEND_RETRIES = 10; // 每包重发次数上限
|
||
inline constexpr uint32_t OTA_PACKET_DELAY_MS = 5; // 每包发送后延时(ms)，给 GD32 处理时间
|
||
|
||
// ============================================================
|
||
// 健康监控阈值
|
||
// ============================================================
|
||
inline constexpr int32_t WIFI_RSSI_CRITICAL = -85;
|
||
inline constexpr int32_t WIFI_RSSI_WARNING = -75;
|
||
inline constexpr int32_t OTA_WIFI_RSSI_CRITICAL = -88;
|
||
inline constexpr uint32_t OTA_WIFI_RSSI_SAMPLE_MAX_AGE_MS = 15000;
|
||
inline constexpr uint32_t OTA_PACKET_HEALTH_CHECK_INTERVAL = 32;
|
||
inline constexpr int32_t TEMP_WARNING = 80;
|
||
inline constexpr int32_t TEMP_CRITICAL = 100;
|
||
inline constexpr size_t HEAP_WARNING_MIN = 10240;
|
||
|
||
// ============================================================
|
||
// 调试配置（UDP 日志）
|
||
// ============================================================
|
||
inline constexpr uint8_t DEBUG_LOG_ENABLED = 1;
|
||
inline constexpr const char* DEBUG_LOG_IP = "192.168.31.3";
|
||
inline constexpr uint16_t DEBUG_LOG_PORT = 6666;
|
||
|
||
// ============================================================
|
||
// BLE OTA 配置
|
||
// ============================================================
|
||
inline constexpr const char* BLE_DEVICE_NAME = "ESP32-OTA-RELAY";
|
||
inline constexpr uint16_t BLE_MTU_SIZE = 512;
|
||
inline constexpr uint16_t BLE_OTA_SERVICE_UUID = 0xFFFF;
|
||
inline constexpr uint16_t BLE_OTA_CTRL_UUID = 0x0001;
|
||
inline constexpr uint16_t BLE_OTA_DATA_IN_UUID = 0x0002;
|
||
inline constexpr uint16_t BLE_OTA_DATA_OUT_UUID = 0x0003;
|
||
inline constexpr uint16_t BLE_OTA_VERSION_UUID = 0x0004;
|
||
inline constexpr uint8_t BLE_OTA_CTRL_TRIGGER_GD32 = 0xF7;
|
||
inline constexpr uint8_t BLE_OTA_CTRL_TRIGGER_ESP32 = 0xF8;
|
||
inline constexpr uint8_t BLE_OTA_CTRL_VERIFY_SHA256 = 0xF9; // SHA-256哈希验证命令（仅从分区读回算 SHA-256，前端比对后再决定是否触发）
|
||
inline constexpr uint8_t BLE_OTA_CTRL_RESTART_ESP32 = 0xFA; // 重启 ESP32 命令（配套前端 expectedReboot 自动重连）
|
||
inline constexpr uint8_t BLE_OTA_CMD_GD32_DATA = 0x00;
|
||
inline constexpr uint8_t BLE_OTA_CMD_ESP32_DATA = 0x01;
|
||
inline constexpr size_t BLE_OTA_CHUNK_PAYLOAD = 480;
|
||
inline constexpr size_t BLE_OTA_PACKET_OVERHEAD = 11;
|
||
// Reorder buffer 窗口大小（吸收 BLE 窗口内乱序到达的包，须 >= BLE_OTA_ACK_WINDOW）
|
||
inline constexpr size_t BLE_OTA_REORDER_WINDOW = 32;
|
||
|
||
// ============================================================
|
||
// 安全常量（需与 GD32 固件团队确认）
|
||
// ⚠️ 请填入实际密钥
|
||
// ============================================================
|
||
inline constexpr uint8_t MASTER_KEY[] = {
|
||
0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF,
|
||
0xFE, 0xDC, 0xBA, 0x98, 0x76, 0x54, 0x32, 0x10
|
||
};
|
||
|
||
// SCRAMBLE_CONST 已移至 Protocol 类，运行时由硬件 RNG 随机生成
|
||
inline constexpr size_t SCRAMBLE_CONST_LEN = 16;
|
||
|
||
// GD32_CHIP_UID 仅保留为默认占位，运行时以握手包解出的芯片地址 UID 为准。
|
||
inline constexpr uint32_t DEVICE_SERIAL_ADDR_LSB = 0x1FFFF7E8U;
|
||
inline constexpr uint32_t DEVICE_SERIAL_ADDR_MID = 0x1FFFF7ECU;
|
||
inline constexpr uint32_t DEVICE_SERIAL_ADDR_MSB = 0x1FFFF7F0U;
|
||
|
||
inline constexpr uint8_t GD32_CHIP_UID[] = {
|
||
0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
|
||
0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B
|
||
};
|
||
|