小龙虾
1b10f89d8c
- 新增 SystemBoot 类用于跟踪各模块初始化状态，提供位图标记与报告功能 - 在 main.cpp 中重构初始化流程，按顺序初始化各模块并记录状态 - 添加 system_boot.cpp 模块文件到构建配置 - CAN反馈任务增加冷启动延迟，避免与GD32初始化窗口冲突 refactor(ota): 优化OTA协调器线程安全机制 - 修改 lock()/unlock() 方法返回take结果，确保mutex正确释放 - 修复多任务并发时mutex死锁问题，避免vTaskPriorityDisinherit断言 - 统一finalize失败后的状态复位逻辑，确保协调器回到IDLE状态 - 优化忙状态超时检测与自愈机制 perf(boot): 优化冷启动时序与资源管理 - 简化README中冷启动优化说明，聚焦核心逻辑 - 优化BOD阈值设置为LVL5，改进电源稳定性 - 增加BLE OTA工作线程优先级，减少丢包情况 - 优化堆告警节流机制，在OTA期间降低告警频率 fix(relay): 改进GD32应用存活检测逻辑 - 调整GD32 APP存活验证时序，增加会话建立验证 - 修复HELLO建立session后未验证role的问题 - 优化FINISH后等待APP启动的静默时间与重试机制 - 统一GD32探测逻辑到OTA中继任务 refactor(server): 优化HTTP服务端内存与性能 - 使用静态缓冲区替代动态分配，减少堆碎片化风险 - 优化CAN批量发送期间暂停反馈任务的机制 - 调整BLE连接参数请求逻辑，提升传输性能 - 改进错误处理流程，避免堆紧张时的额外分配 bump(version): 更新固件版本至0.3.50 - 更新版本号从0.3.49到0.3.50 - 更新编译时间戳与Git哈希值
1745 lines
65 KiB
C++
1745 lines
65 KiB
C++
/*
|
||
* spi_master.cpp - SPI Master 驱动实现
|
||
* T1.1 - T1.4
|
||
* ESP-IDF 6.0 适配版本
|
||
* CANFD 3通道发送接口
|
||
*
|
||
* 所有功能封装为 SpiMaster 类方法。
|
||
*/
|
||
#include <string.h>
|
||
#include <stdio.h>
|
||
#include <stdlib.h>
|
||
#include "freertos/FreeRTOS.h"
|
||
#include "freertos/portmacro.h"
|
||
#include "freertos/task.h"
|
||
#include "freertos/semphr.h"
|
||
#include "freertos/queue.h"
|
||
#include "driver/spi_master.h"
|
||
#include "driver/gpio.h"
|
||
#include "soc/gpio_reg.h"
|
||
#include "soc/spi_struct.h"
|
||
#include "esp_err.h"
|
||
#include "esp_log.h"
|
||
#include "esp_random.h" // esp_random() for HELLO session_id
|
||
#include "esp_intr_alloc.h" // ESP_INTR_FLAG_IRAM
|
||
#include "spi_master.h"
|
||
#include "spi_link_v2.h"
|
||
#include "app_config.h"
|
||
#include "monitor/debug_log.h"
|
||
|
||
|
||
static constexpr size_t kSpiTransferMaxBytes = 256U;
|
||
|
||
/** @brief submitJob 堆 Job 与 worker 之间的 finished/abandoned 交接。 */
|
||
static portMUX_TYPE s_spiJobMux = portMUX_INITIALIZER_UNLOCKED;
|
||
|
||
/**
|
||
* @brief 发送路径 CS 时钟字节数。
|
||
* Boot TX DMA 按满缓冲预装（kTxBufSize=128），主机过短时钟会：
|
||
* - 截断延迟一拍的响应；
|
||
* - 两段变长读若中途释放 CS，Boot 会把 s_txPending 当已交付清掉 → 后续全 0xFF。
|
||
* 下限 64：覆盖 HELLO_ACK(~26)/短 ACK；上限 SPI_OTA_FRAME_MAX(256)。
|
||
* APP 侧 TX 满缓冲 256：poll/ring 读预算见 spiRespReadBudget()。
|
||
*/
|
||
static size_t spiXferBytes(size_t frame_len)
|
||
{
|
||
size_t n = frame_len;
|
||
if (n < 64U) {
|
||
n = 64U;
|
||
}
|
||
if (n > SPI_OTA_FRAME_MAX) {
|
||
n = SPI_OTA_FRAME_MAX;
|
||
}
|
||
return n;
|
||
}
|
||
|
||
/**
|
||
* @brief 读响应时单 CS 时钟预算（按最近 HELLO 的 GD32 role 分支）。
|
||
* - BOOT：TX DMA 满缓冲 128 → 读 128，避免过长时钟 underrun
|
||
* - APP / unknown：TX DMA 满缓冲 256 → 读 256，避免 0xC1 等长 EVENT 被截断 CRC
|
||
* unknown 偏 APP：宁长勿短（BOOT 短帧在 256 时钟下尾部 0xFF，仍可 parse）。
|
||
*/
|
||
static size_t spiRespReadBudget(void)
|
||
{
|
||
const uint8_t role = SpiMaster::instance().gd32Role();
|
||
if (role == V2_ROLE_BOOT) {
|
||
return SPI_BOOT_TX_BUF_SIZE;
|
||
}
|
||
return SPI_APP_TX_BUF_SIZE;
|
||
}
|
||
|
||
/** @brief ISR-safe GPIO 电平读取（不调用 Flash 中的 gpio_get_level）。
|
||
* 用于 SPIready 边沿中断，避免在 cache 被禁用期间访问 Flash 代码。
|
||
*/
|
||
static int IRAM_ATTR readReadyLevelRaw(void)
|
||
{
|
||
return (REG_READ(GPIO_IN_REG) >> SPI_READY_GPIO) & 0x1;
|
||
}
|
||
|
||
/* 前向声明：waitSpiDataReady 定义在文件下方，
|
||
* 但 serviceRingOnce / otaPollResponseUnlocked 等更早出现的方法需要它。 */
|
||
static esp_err_t waitSpiDataReady(uint32_t timeout_ms);
|
||
|
||
// ============================================================
|
||
// 单例
|
||
// ============================================================
|
||
/**
|
||
* @brief 获取 SpiMaster 单例实例（单例模式）。
|
||
* @return SpiMaster 单例引用。
|
||
*/
|
||
SpiMaster& SpiMaster::instance()
|
||
{
|
||
static SpiMaster inst;
|
||
return inst;
|
||
}
|
||
|
||
// ============================================================
|
||
// SPI Worker：唯一持 SPI 的任务；ISR 只通知本任务
|
||
// ============================================================
|
||
|
||
bool SpiMaster::onWorker() const
|
||
{
|
||
return m_workerTask != nullptr && xTaskGetCurrentTaskHandle() == m_workerTask;
|
||
}
|
||
|
||
bool SpiMaster::pushEvent(uint8_t type, const uint8_t *payload, size_t len)
|
||
{
|
||
if (m_eventCount >= kEventSlots) {
|
||
/* 队列满：丢最旧一帧，保证新事件可进 */
|
||
m_eventTail = (uint8_t)((m_eventTail + 1U) % kEventSlots);
|
||
m_eventCount--;
|
||
if (m_eventSem) {
|
||
(void)xSemaphoreTake(m_eventSem, 0);
|
||
}
|
||
}
|
||
EventSlot &slot = m_eventQ[m_eventHead];
|
||
slot.type = type;
|
||
slot.len = (uint16_t)((len > sizeof(slot.data)) ? sizeof(slot.data) : len);
|
||
if (payload && slot.len > 0U) {
|
||
memcpy(slot.data, payload, slot.len);
|
||
}
|
||
m_eventHead = (uint8_t)((m_eventHead + 1U) % kEventSlots);
|
||
m_eventCount++;
|
||
if (m_eventSem) {
|
||
(void)xSemaphoreGive(m_eventSem);
|
||
}
|
||
return true;
|
||
}
|
||
|
||
bool SpiMaster::popEvent(uint8_t *type, uint8_t *payload, size_t max_len, size_t *len)
|
||
{
|
||
if (m_eventCount == 0U) {
|
||
return false;
|
||
}
|
||
EventSlot &slot = m_eventQ[m_eventTail];
|
||
if (type) {
|
||
*type = slot.type;
|
||
}
|
||
size_t copy_len = slot.len;
|
||
if (copy_len > max_len) {
|
||
copy_len = max_len;
|
||
}
|
||
if (len) {
|
||
*len = copy_len;
|
||
}
|
||
if (payload && copy_len > 0U) {
|
||
memcpy(payload, slot.data, copy_len);
|
||
}
|
||
m_eventTail = (uint8_t)((m_eventTail + 1U) % kEventSlots);
|
||
m_eventCount--;
|
||
return true;
|
||
}
|
||
|
||
void SpiMaster::setSuppressRingService(bool suppress)
|
||
{
|
||
m_suppressRingService = suppress;
|
||
if (suppress) {
|
||
/* 丢弃已锁存的按铃标志，避免解除后立刻误读残留边沿 */
|
||
m_gd32RequestPending = false;
|
||
}
|
||
}
|
||
|
||
void SpiMaster::confirmTxSeqAccepted()
|
||
{
|
||
/* 业务 ACK 已确认：保证下一包使用 lastSentSeq+1，即使头 ack_seq 曾失配 */
|
||
m_txSeq = (uint8_t)(m_lastSentSeq + 1U);
|
||
m_rxAckedSeq = m_lastSentSeq;
|
||
m_lastRxAckMatched = true;
|
||
}
|
||
|
||
esp_err_t SpiMaster::serviceRingOnce()
|
||
{
|
||
/* OTA 中继期间禁止按铃读：OTA ACK/WAIT 也拉低 PB6，偷读会导致 poll 空等。 */
|
||
if (m_suppressRingService) {
|
||
m_gd32RequestPending = false;
|
||
return ESP_ERR_NOT_FOUND;
|
||
}
|
||
|
||
/* 仅 worker 调用。有 pending 或 DATA_READY 低时读一帧 EVENT。 */
|
||
if (!m_gd32RequestPending) {
|
||
/* 无 ISR 标志时，若线已低仍尝试读（丢边沿兜底） */
|
||
if (readReadyLevelRaw() != 0) {
|
||
return ESP_ERR_NOT_FOUND;
|
||
}
|
||
}
|
||
m_gd32RequestPending = false;
|
||
m_linkState.enterBusy(HandshakeState::SERVING_GD32_RING);
|
||
|
||
if (waitSpiDataReady(3U) != ESP_OK) {
|
||
m_linkState.exitBusy();
|
||
return ESP_ERR_NOT_FOUND;
|
||
}
|
||
|
||
uint8_t rx_raw[SPI_OTA_FRAME_MAX];
|
||
size_t rx_len = 0U;
|
||
esp_err_t ret = readV2FrameVarlen(rx_raw, sizeof(rx_raw), &rx_len, 500U);
|
||
m_linkState.exitBusy();
|
||
|
||
if (ret != ESP_OK) {
|
||
return ret;
|
||
}
|
||
|
||
uint8_t found_type = 0;
|
||
const uint8_t *found_payload = nullptr;
|
||
size_t found_len = 0;
|
||
size_t frame_offset = 0;
|
||
if (!otaFindFrame(rx_raw, rx_len, &found_type, &found_payload,
|
||
&found_len, &frame_offset)) {
|
||
return ESP_ERR_INVALID_RESPONSE;
|
||
}
|
||
if (found_type == V2_TYPE_CREDIT_UPDATE) {
|
||
DEBUG_DBG("SPI", "worker CREDIT_UPDATE credit=%u", (unsigned)m_remoteCredit);
|
||
return ESP_ERR_NOT_FOUND;
|
||
}
|
||
/* RESPONSE（OTA ACK/WAIT/ERROR）绝不能当 EVENT 入队；否则 OTA poll 丢响应。
|
||
* 此处帧已被时钟读走，只能记统计；真正防护靠 m_suppressRingService。 */
|
||
if (found_type == SPI_OTA_RSP_ACK || found_type == SPI_OTA_RSP_WAIT ||
|
||
found_type == SPI_OTA_RSP_ERROR || found_type == V2_TYPE_RSP_ACK ||
|
||
found_type == V2_TYPE_RSP_WAIT || found_type == V2_TYPE_RSP_ERROR) {
|
||
static uint32_t s_steal_logs = 0U;
|
||
if ((++s_steal_logs % 16U) == 1U) {
|
||
DEBUG_WARN("SPI", "serviceRing 读到 RESPONSE type=0x%02X（应禁止，log#%lu）",
|
||
found_type, (unsigned long)s_steal_logs);
|
||
}
|
||
return ESP_ERR_INVALID_RESPONSE;
|
||
}
|
||
{
|
||
LockGuard lock(m_mutex);
|
||
(void)pushEvent(found_type, found_payload, found_len);
|
||
}
|
||
return ESP_OK;
|
||
}
|
||
|
||
void SpiMaster::executeJob(Job &job)
|
||
{
|
||
/* 已在 worker 上下文；下列 public API 见 onWorker() 后走实现体，不再二次入队。 */
|
||
switch (job.kind) {
|
||
case JobKind::Transact:
|
||
job.result = otaSendAndPoll(job.type,
|
||
job.payload_len ? job.payload : nullptr,
|
||
job.payload_len,
|
||
job.out_type, job.out_payload, job.out_max,
|
||
job.out_len, job.timeout_ms);
|
||
break;
|
||
case JobKind::Poll:
|
||
job.result = otaPollResponse(job.out_type, job.out_payload, job.out_max,
|
||
job.out_len, job.timeout_ms);
|
||
break;
|
||
case JobKind::Hello:
|
||
job.result = hello(job.timeout_ms, job.role_hint);
|
||
break;
|
||
case JobKind::EnterBoot:
|
||
job.result = appRequestBootloader();
|
||
break;
|
||
case JobKind::Ping:
|
||
job.result = appPing(job.timeout_ms, job.out_uptime, job.out_version);
|
||
break;
|
||
case JobKind::WaitBoot:
|
||
job.result = waitForBootloaderReady(job.timeout_ms);
|
||
break;
|
||
default:
|
||
job.result = ESP_ERR_INVALID_ARG;
|
||
break;
|
||
}
|
||
}
|
||
|
||
void SpiMaster::finishHeapJob(Job *job)
|
||
{
|
||
if (job == nullptr) {
|
||
return;
|
||
}
|
||
/* 先 give，再标 finished；提交方 take 成功后会 spin 等 finished 再 free。 */
|
||
if (job->done) {
|
||
(void)xSemaphoreGive(job->done);
|
||
}
|
||
if (!job->heap_allocated) {
|
||
return;
|
||
}
|
||
taskENTER_CRITICAL(&s_spiJobMux);
|
||
job->finished = true;
|
||
const bool free_it = job->abandoned;
|
||
taskEXIT_CRITICAL(&s_spiJobMux);
|
||
if (free_it) {
|
||
if (job->done) {
|
||
vSemaphoreDelete(job->done);
|
||
job->done = nullptr;
|
||
}
|
||
free(job);
|
||
}
|
||
}
|
||
|
||
esp_err_t SpiMaster::submitJob(Job &job)
|
||
{
|
||
if (m_jobQueue == nullptr || m_workerTask == nullptr || onWorker()) {
|
||
executeJob(job);
|
||
return job.result;
|
||
}
|
||
|
||
/* 跨任务作业：堆上 Job + binary 完成信号量 */
|
||
Job *heap_job = static_cast<Job *>(calloc(1, sizeof(Job)));
|
||
if (heap_job == nullptr) {
|
||
DEBUG_ERR("SPI", "submitJob: calloc failed kind=%u", (unsigned)job.kind);
|
||
return ESP_ERR_NO_MEM;
|
||
}
|
||
*heap_job = job;
|
||
heap_job->heap_allocated = true;
|
||
heap_job->finished = false;
|
||
heap_job->abandoned = false;
|
||
heap_job->result = ESP_FAIL;
|
||
heap_job->done = xSemaphoreCreateBinary();
|
||
if (heap_job->done == nullptr) {
|
||
free(heap_job);
|
||
DEBUG_ERR("SPI", "submitJob: done sem create failed");
|
||
return ESP_ERR_NO_MEM;
|
||
}
|
||
|
||
const TickType_t qwait = pdMS_TO_TICKS(
|
||
(job.timeout_ms > 0U ? job.timeout_ms : 1000U) + 2000U);
|
||
if (xQueueSend(m_jobQueue, &heap_job, qwait) != pdTRUE) {
|
||
DEBUG_WARN("SPI", "worker job queue full/timeout kind=%u", (unsigned)job.kind);
|
||
vSemaphoreDelete(heap_job->done);
|
||
free(heap_job);
|
||
return ESP_ERR_TIMEOUT;
|
||
}
|
||
xTaskNotify(m_workerTask, 0x10U, eSetBits);
|
||
|
||
const TickType_t dwait = pdMS_TO_TICKS(
|
||
(job.timeout_ms > 0U ? job.timeout_ms : 1000U) + 10000U);
|
||
if (xSemaphoreTake(heap_job->done, dwait) == pdTRUE) {
|
||
const esp_err_t result = heap_job->result;
|
||
/* worker 在 give 后才写 finished；等其退出临界区后再由本侧独占 free。 */
|
||
for (;;) {
|
||
taskENTER_CRITICAL(&s_spiJobMux);
|
||
const bool fin = heap_job->finished;
|
||
taskEXIT_CRITICAL(&s_spiJobMux);
|
||
if (fin) {
|
||
break;
|
||
}
|
||
vTaskDelay(1);
|
||
}
|
||
vSemaphoreDelete(heap_job->done);
|
||
heap_job->done = nullptr;
|
||
free(heap_job);
|
||
return result;
|
||
}
|
||
|
||
/* 超时：标记 abandoned；若 worker 已跑完则本侧 free，否则 worker finishHeapJob free。 */
|
||
taskENTER_CRITICAL(&s_spiJobMux);
|
||
heap_job->abandoned = true;
|
||
const bool already_done = heap_job->finished;
|
||
taskEXIT_CRITICAL(&s_spiJobMux);
|
||
|
||
if (already_done) {
|
||
(void)xSemaphoreTake(heap_job->done, 0);
|
||
const esp_err_t result = heap_job->result;
|
||
vSemaphoreDelete(heap_job->done);
|
||
heap_job->done = nullptr;
|
||
free(heap_job);
|
||
return result;
|
||
}
|
||
|
||
DEBUG_ERR("SPI", "worker job done timeout kind=%u（堆 Job 交 worker 释放）",
|
||
(unsigned)job.kind);
|
||
return ESP_ERR_TIMEOUT;
|
||
}
|
||
|
||
void SpiMaster::workerEntry(void *arg)
|
||
{
|
||
static_cast<SpiMaster *>(arg)->workerLoop();
|
||
}
|
||
|
||
void SpiMaster::workerLoop()
|
||
{
|
||
m_workerTask = xTaskGetCurrentTaskHandle();
|
||
m_spiTaskHandle = m_workerTask;
|
||
DEBUG_INFO("SPI", "SPI worker started, handle=%p", (void *)m_workerTask);
|
||
|
||
for (;;) {
|
||
/* ★ 只在 ISR 置位 m_gd32RequestPending 时读 EVENT。
|
||
* 禁止见 DATA_READY 低就 serviceRing：命令 HELLO_ACK/OTA 响应也会拉低
|
||
* PB6，会被偷走当事件 → 业务 poll 全 0xFF，OTA/ENTER_BOOT 全挂。
|
||
* OTA 中继期间 m_suppressRingService 屏蔽按铃读。 */
|
||
if (m_gd32RequestPending && !m_suppressRingService) {
|
||
(void)serviceRingOnce();
|
||
} else if (m_suppressRingService) {
|
||
m_gd32RequestPending = false;
|
||
}
|
||
|
||
Job *job = nullptr;
|
||
if (xQueueReceive(m_jobQueue, &job, pdMS_TO_TICKS(1)) == pdTRUE && job != nullptr) {
|
||
executeJob(*job);
|
||
finishHeapJob(job);
|
||
continue;
|
||
}
|
||
|
||
/* 无 job：等 GPIO / 提交唤醒。
|
||
* 超时只是无事件时的兜底回扫周期；ISR 的 xTaskNotifyFromISR 会立即唤醒
|
||
* 本任务，响应延迟不由这里决定。过短会令 spi_worker(优先级6) 忙转压住
|
||
* httpd(优先级5)，导致 /system/status、/logs 响应不来 → 网页收不到消息。 */
|
||
uint32_t bits = 0U;
|
||
(void)xTaskNotifyWait(0U, 0xFFFFFFFFU, &bits, pdMS_TO_TICKS(25));
|
||
if (m_suppressRingService) {
|
||
m_gd32RequestPending = false;
|
||
} else if ((bits & 0x01U) || m_gd32RequestPending) {
|
||
(void)serviceRingOnce();
|
||
}
|
||
}
|
||
}
|
||
|
||
/**
|
||
* @brief GPIO 边沿中断回调（DATA_READY / PB6）。
|
||
*
|
||
* 仅处理下降沿：GD32 有待读数据（按铃）。若本端 IDLE 则置
|
||
* m_gd32RequestPending 并唤醒 SPI worker。上升沿不再使用（旧 waitSpiReady 已删）。
|
||
* ISR 内仅做标志翻转 + 任务通知，不做 SPI 传输。
|
||
*/
|
||
void IRAM_ATTR SpiMaster::onReadyEdgeISR(void *arg)
|
||
{
|
||
SpiMaster *self = static_cast<SpiMaster *>(arg);
|
||
if (!self) { return; }
|
||
/* 只关心低电平（下降沿后采样）：有数据待读 */
|
||
if (readReadyLevelRaw() != 0) {
|
||
return;
|
||
}
|
||
if (self->m_suppressRingService) {
|
||
/* OTA 中继：PB6 低是 WAIT/ACK 就绪，留给业务 poll，不按 EVENT 处理 */
|
||
return;
|
||
}
|
||
if (!self->m_linkState.acceptRing()) {
|
||
return;
|
||
}
|
||
self->m_gd32RequestPending = true;
|
||
if (self->m_spiTaskHandle) {
|
||
BaseType_t hp = pdFALSE;
|
||
xTaskNotifyFromISR(self->m_spiTaskHandle, 0x01U, eSetBits, &hp);
|
||
portYIELD_FROM_ISR(hp);
|
||
}
|
||
}
|
||
|
||
/**
|
||
* @brief 等 GD32 拉低 PB6（有待读响应）。
|
||
* v2 DATA_READY：低 = 有数据；高 = 队列空。TX 前不等 HIGH（CS 即互斥）。
|
||
* @return ESP_OK 已低；ESP_ERR_TIMEOUT 超时仍为高（调用方可再决定是否盲 poll）。
|
||
*/
|
||
static esp_err_t waitSpiDataReady(uint32_t timeout_ms)
|
||
{
|
||
if (readReadyLevelRaw() == 0) { return ESP_OK; } /* 已低 = 有数据 */
|
||
if (timeout_ms == 0U) { return ESP_ERR_TIMEOUT; }
|
||
|
||
const TickType_t deadline = xTaskGetTickCount() + pdMS_TO_TICKS(timeout_ms);
|
||
while (xTaskGetTickCount() < deadline) {
|
||
if (readReadyLevelRaw() == 0) { return ESP_OK; }
|
||
vTaskDelay(pdMS_TO_TICKS(1) > 0 ? pdMS_TO_TICKS(1) : 1);
|
||
}
|
||
return ESP_ERR_TIMEOUT;
|
||
}
|
||
|
||
// ============================================================
|
||
// 内部 SPI 传输
|
||
// ============================================================
|
||
/**
|
||
* @brief 执行底层 SPI 时钟同步传输。
|
||
* @param tx_buf 发送数据缓冲区，可为 NULL。
|
||
* @param tx_len 发送数据长度。
|
||
* @param rx_buf 接收数据缓冲区，可为 NULL。
|
||
* @param rx_len 接收数据长度。
|
||
* @param timeout_ms 超时时间（毫秒），0 表示无限等待。
|
||
* @return ESP_OK 表示成功，否则返回错误码。
|
||
*/
|
||
esp_err_t SpiMaster::transferClocked(const uint8_t *tx_buf, size_t tx_len,
|
||
uint8_t *rx_buf, size_t rx_len,
|
||
uint32_t timeout_ms)
|
||
{
|
||
return transferClockedFlags(tx_buf, tx_len, rx_buf, rx_len, timeout_ms, 0U);
|
||
}
|
||
|
||
esp_err_t SpiMaster::transferClockedFlags(const uint8_t *tx_buf, size_t tx_len,
|
||
uint8_t *rx_buf, size_t rx_len,
|
||
uint32_t timeout_ms, uint32_t trans_flags)
|
||
{
|
||
if (m_spiDevice == NULL) {
|
||
return ESP_ERR_INVALID_STATE;
|
||
}
|
||
|
||
if ((tx_len > 0U && tx_buf == NULL) || (rx_len > 0U && rx_buf == NULL)) {
|
||
DEBUG_WARN("SPI", "transferClocked INVALID_ARG: tx_len=%u tx_buf=%p rx_len=%u rx_buf=%p dev=%p",
|
||
(unsigned)tx_len, tx_buf, (unsigned)rx_len, rx_buf, m_spiDevice);
|
||
return ESP_ERR_INVALID_ARG;
|
||
}
|
||
|
||
const size_t total_len = (tx_len > rx_len) ? tx_len : rx_len;
|
||
if (total_len == 0U) {
|
||
return ESP_OK;
|
||
}
|
||
if (total_len > kSpiTransferMaxBytes) {
|
||
return ESP_ERR_INVALID_SIZE;
|
||
}
|
||
|
||
uint8_t tx_staging[kSpiTransferMaxBytes];
|
||
uint8_t rx_staging[kSpiTransferMaxBytes];
|
||
const uint8_t *tx_ptr = tx_buf;
|
||
uint8_t *rx_ptr = rx_buf;
|
||
|
||
if (tx_len < total_len) {
|
||
memset(tx_staging, 0xFF, total_len);
|
||
if (tx_buf != NULL && tx_len > 0U) {
|
||
memcpy(tx_staging, tx_buf, tx_len);
|
||
}
|
||
tx_ptr = tx_staging;
|
||
}
|
||
|
||
if (rx_len > 0U && rx_len < total_len) {
|
||
rx_ptr = rx_staging;
|
||
}
|
||
|
||
spi_transaction_t t = {};
|
||
t.flags = trans_flags;
|
||
t.length = total_len * 8U;
|
||
t.rxlength = (rx_len > 0U) ? (total_len * 8U) : 0U;
|
||
t.tx_buffer = tx_ptr;
|
||
t.rx_buffer = (rx_len > 0U) ? rx_ptr : NULL;
|
||
|
||
/* SPI 事务等待使用有界超时 */
|
||
const uint32_t effective_ms = (timeout_ms == 0U) ? 500U
|
||
: (timeout_ms < 50U ? 50U : timeout_ms);
|
||
const TickType_t queue_wait = pdMS_TO_TICKS(effective_ms);
|
||
esp_err_t ret = spi_device_queue_trans(m_spiDevice, &t, queue_wait);
|
||
if (ret != ESP_OK) {
|
||
DEBUG_WARN("SPI", "spi_device_queue_trans fail: %s len=%u",
|
||
esp_err_to_name(ret), (unsigned)(total_len * 8U));
|
||
return ret;
|
||
}
|
||
|
||
spi_transaction_t *ret_trans = NULL;
|
||
/* 结果等待：调用方超时 + 余量，硬上限 2s，绝不用无限等 */
|
||
uint32_t result_ms = effective_ms + 200U;
|
||
if (result_ms < 100U) {
|
||
result_ms = 100U;
|
||
}
|
||
if (result_ms > 2000U) {
|
||
result_ms = 2000U;
|
||
}
|
||
const TickType_t result_wait = pdMS_TO_TICKS(result_ms);
|
||
ret = spi_device_get_trans_result(m_spiDevice, &ret_trans, result_wait);
|
||
if (ret != ESP_OK) {
|
||
/* 再给一次有界抢救（最多 1s），清掉可能残留的 in-flight 事务。
|
||
* 使用有界超时，避免对端无响应时 worker 永久阻塞。 */
|
||
DEBUG_WARN("SPI", "spi_device_get_trans_result timeout: %s len=%u, bounded retry 1s",
|
||
esp_err_to_name(ret), (unsigned)(total_len * 8U));
|
||
ret = spi_device_get_trans_result(m_spiDevice, &ret_trans, pdMS_TO_TICKS(1000));
|
||
if (ret != ESP_OK) {
|
||
DEBUG_ERR("SPI", "spi_device_get_trans_result 放弃: %s（可能需复位 SPI）",
|
||
esp_err_to_name(ret));
|
||
/* 尽力排空 ret_queue，避免后续 queue_trans 永久堵死 */
|
||
spi_transaction_t *junk = nullptr;
|
||
while (spi_device_get_trans_result(m_spiDevice, &junk, 0) == ESP_OK) {
|
||
(void)junk;
|
||
}
|
||
return ESP_ERR_TIMEOUT;
|
||
}
|
||
(void)ret_trans;
|
||
return ESP_ERR_TIMEOUT;
|
||
}
|
||
(void)ret_trans;
|
||
|
||
if (rx_len > 0U && rx_ptr != rx_buf) {
|
||
memcpy(rx_buf, rx_ptr, rx_len);
|
||
}
|
||
return ESP_OK;
|
||
}
|
||
|
||
/**
|
||
* @brief 读一帧响应（单 CS 固定预算，再 v2_parse 截真实长度）。
|
||
*
|
||
* 不用两段 KEEP_ACTIVE：Boot 在 CS 释放时无论是否读完都清 s_txPending，
|
||
* 中途断 CS 会丢 HELLO_ACK，后续 MISO 全 0xFF（线上已复现）。
|
||
* 时钟预算见 spiRespReadBudget()：BOOT=128，APP=256。
|
||
*/
|
||
esp_err_t SpiMaster::readV2FrameVarlen(uint8_t *out_frame, size_t out_max, size_t *out_len,
|
||
uint32_t timeout_ms)
|
||
{
|
||
if (out_frame == nullptr || out_len == nullptr || out_max < V2_HEADER_LEN) {
|
||
return ESP_ERR_INVALID_ARG;
|
||
}
|
||
if (m_spiDevice == nullptr) {
|
||
return ESP_ERR_INVALID_STATE;
|
||
}
|
||
|
||
*out_len = 0U;
|
||
|
||
size_t budget = spiRespReadBudget();
|
||
if (budget > out_max) {
|
||
budget = out_max;
|
||
}
|
||
if (budget > kSpiTransferMaxBytes) {
|
||
budget = kSpiTransferMaxBytes;
|
||
}
|
||
|
||
uint8_t dummy[kSpiTransferMaxBytes];
|
||
memset(dummy, 0xFF, budget);
|
||
memset(out_frame, 0xFF, budget);
|
||
|
||
esp_err_t ret = transferClocked(dummy, budget, out_frame, budget, timeout_ms);
|
||
if (ret != ESP_OK) {
|
||
return ret;
|
||
}
|
||
|
||
v2_header_t hdr;
|
||
const uint8_t *pload = nullptr;
|
||
if (!v2_parse_frame(out_frame, budget, &hdr, &pload)) {
|
||
return ESP_ERR_INVALID_RESPONSE;
|
||
}
|
||
|
||
const size_t total = V2_HEADER_LEN + (size_t)hdr.payload_len + V2_CRC_LEN;
|
||
if (total > out_max) {
|
||
return ESP_ERR_INVALID_SIZE;
|
||
}
|
||
/* parse 可能从 offset>0 找到帧：搬到缓冲区头，方便调用方 */
|
||
if (hdr.frame_offset > 0U && hdr.frame_offset + total <= budget) {
|
||
memmove(out_frame, out_frame + hdr.frame_offset, total);
|
||
}
|
||
*out_len = total;
|
||
return ESP_OK;
|
||
}
|
||
|
||
// ============================================================
|
||
// OTA 帧工具
|
||
// ============================================================
|
||
|
||
/*
|
||
* otaBuildFrame：使用当前 session/seq 成员填充 v2 帧头，FLAGS=REQUEST。
|
||
* 记录 m_lastSentSeq 供响应归属匹配。
|
||
*/
|
||
bool SpiMaster::otaBuildFrame(uint8_t type, const uint8_t *payload, size_t payload_len,
|
||
uint8_t *out, size_t *out_len)
|
||
{
|
||
if (!out || !out_len) return false;
|
||
if (payload_len > 0U && payload == NULL) return false;
|
||
|
||
SpiMaster &self = SpiMaster::instance();
|
||
const uint8_t flags = V2_FLAG_REQUEST;
|
||
const uint8_t tx_seq = self.m_txSeq;
|
||
const uint8_t ack_seq = self.m_rxAckedSeq;
|
||
const uint8_t credit = self.m_localCredit;
|
||
self.m_lastSentSeq = tx_seq; /* 记录发送序号供响应归属匹配 */
|
||
|
||
return v2_build_frame(type, flags, self.m_sessionId,
|
||
tx_seq, ack_seq, credit,
|
||
payload, payload_len, out, out_len);
|
||
}
|
||
|
||
/*
|
||
* otaFindFrame：委托 v2_parse_frame + SESSION/SEQ 校验。
|
||
* ESP32 是主机，收到 GD32 的 RESPONSE/EVENT 帧：
|
||
* - ack_seq 携带"GD32 确认收到的 ESP32 请求序号"，用于响应归属匹配
|
||
* - tx_seq 是 GD32 的发送序号
|
||
*/
|
||
bool SpiMaster::otaFindFrame(const uint8_t *buf, size_t buf_len,
|
||
uint8_t *type, const uint8_t **payload, size_t *payload_len,
|
||
size_t *frame_offset)
|
||
{
|
||
if (!buf) return false;
|
||
|
||
v2_header_t hdr;
|
||
const uint8_t *pload = nullptr;
|
||
if (!v2_parse_frame(buf, buf_len, &hdr, &pload)) {
|
||
return false;
|
||
}
|
||
|
||
SpiMaster &self = SpiMaster::instance();
|
||
|
||
/* 更新对端 credit */
|
||
self.m_remoteCredit = hdr.credit;
|
||
|
||
if (self.m_v2Active) {
|
||
/* SESSION_ID 校验 */
|
||
if (hdr.session_id != self.m_sessionId) {
|
||
self.m_stats.seq_errors++;
|
||
const bool is_event = (hdr.flags & V2_FLAG_EVENT) != 0U;
|
||
/* EVENT 按铃帧在 GD32 session 未激活时 session_id=0（见 requestEsp32Read）。
|
||
* 若此处直接拒绝：按铃被读走却解析失败 → 狂刷 WARN，CAN 反馈全丢。
|
||
* 策略：EVENT 一律放行；REQUEST/RESPONSE 仍拒绝错 session。 */
|
||
if (!is_event) {
|
||
static uint32_t s_sess_mm_logs = 0U;
|
||
if ((++s_sess_mm_logs % 32U) == 1U) {
|
||
DEBUG_WARN("SPI", "v2 SESSION mismatch: got=0x%08lX expected=0x%08lX type=0x%02X (log#%lu)",
|
||
(unsigned long)hdr.session_id, (unsigned long)self.m_sessionId,
|
||
hdr.type, (unsigned long)s_sess_mm_logs);
|
||
}
|
||
return false;
|
||
}
|
||
static uint32_t s_evt_sess0_logs = 0U;
|
||
if ((++s_evt_sess0_logs % 64U) == 1U) {
|
||
DEBUG_DBG("SPI", "EVENT session mismatch accepted: got=0x%08lX exp=0x%08lX type=0x%02X",
|
||
(unsigned long)hdr.session_id, (unsigned long)self.m_sessionId, hdr.type);
|
||
}
|
||
}
|
||
|
||
/* 响应归属：ack_seq 应等于 m_lastSentSeq。
|
||
*
|
||
* ★ 关键：RESPONSE（ACK/WAIT/ERROR）在 CS 上已被读走，GD32 会清 s_txPending。
|
||
* 若因 ack_seq 失配直接 return false，业务层永远看不到该帧 → 空等/重发/卡死。
|
||
* 策略：CRC+session 合法的 RESPONSE 一律交给调用方；用 m_lastRxAckMatched
|
||
* 标记是否归属当前请求。业务层以结构化 payload（BA C0+seq）做最终判定。 */
|
||
if (hdr.flags & V2_FLAG_RESPONSE) {
|
||
self.m_lastRxAckMatched = (hdr.ack_seq == self.m_lastSentSeq);
|
||
if (!self.m_lastRxAckMatched) {
|
||
static uint32_t s_stale_logs = 0U;
|
||
if ((++s_stale_logs % 32U) == 1U) {
|
||
DEBUG_DBG("SPI", "v2 stale RESPONSE delivered: type=0x%02X ack_seq=%u expected=%u (log#%lu)",
|
||
hdr.type, hdr.ack_seq, self.m_lastSentSeq,
|
||
(unsigned long)s_stale_logs);
|
||
}
|
||
} else {
|
||
self.m_rxAckedSeq = self.m_lastSentSeq;
|
||
}
|
||
} else {
|
||
self.m_lastRxAckMatched = false;
|
||
}
|
||
|
||
/* 更新期望的对端序号（EVENT 帧的 tx_seq） */
|
||
if (hdr.flags & V2_FLAG_EVENT) {
|
||
self.m_expectedRxSeq = hdr.tx_seq + 1U;
|
||
}
|
||
}
|
||
|
||
if (type) *type = hdr.type;
|
||
if (payload) *payload = pload;
|
||
if (payload_len) *payload_len = hdr.payload_len;
|
||
if (frame_offset) *frame_offset = hdr.frame_offset;
|
||
return true;
|
||
}
|
||
|
||
// ============================================================
|
||
// 初始化
|
||
// ============================================================
|
||
/**
|
||
* @brief 初始化 SPI2 总线与目标从设备。
|
||
* @return ESP_OK 表示成功，否则返回错误码。
|
||
*/
|
||
esp_err_t SpiMaster::init()
|
||
{
|
||
/* 先创建互斥锁，再进入临界区 */
|
||
if (!m_mutex) {
|
||
m_mutex = xSemaphoreCreateMutex();
|
||
if (m_mutex == NULL) {
|
||
DEBUG_ERR("SPI", "SPI 互斥锁创建失败");
|
||
return ESP_ERR_NO_MEM;
|
||
}
|
||
}
|
||
LockGuard lock(m_mutex);
|
||
|
||
DEBUG_INFO("SPI", "=== 初始化 SPI2 总线 ===");
|
||
|
||
spi_bus_config_t bus_cfg = {};
|
||
bus_cfg.miso_io_num = 7;
|
||
bus_cfg.mosi_io_num = 5;
|
||
bus_cfg.sclk_io_num = 6;
|
||
bus_cfg.quadwp_io_num = -1;
|
||
bus_cfg.quadhd_io_num = -1;
|
||
bus_cfg.max_transfer_sz = kSpiTransferMaxBytes * SPI_QUEUE_SIZE;
|
||
|
||
esp_err_t ret = spi_bus_initialize(SPI2_HOST, &bus_cfg, SPI_DMA_CH_AUTO);
|
||
if (ret != ESP_OK) {
|
||
DEBUG_ERR("SPI", "SPI 总线初始化失败: %s", esp_err_to_name(ret));
|
||
return ret;
|
||
}
|
||
|
||
spi_device_interface_config_t dev_cfg = {};
|
||
dev_cfg.clock_speed_hz = SPI_CLOCK_HZ;
|
||
dev_cfg.mode = SPI_MODE;
|
||
dev_cfg.spics_io_num = SPI_MASTER_CS_GPIO;
|
||
dev_cfg.queue_size = SPI_QUEUE_SIZE;
|
||
dev_cfg.command_bits = 0;
|
||
dev_cfg.address_bits = 0;
|
||
dev_cfg.dummy_bits = 0;
|
||
/* 加长 CS 建立时间，给 GD32 EXTI/预装 DMA 留余量（单位：SPI 半周期相关） */
|
||
dev_cfg.cs_ena_posttrans = 32;
|
||
dev_cfg.cs_ena_pretrans = 64;
|
||
|
||
ret = spi_bus_add_device(SPI2_HOST, &dev_cfg, &m_spiDevice);
|
||
if (ret != ESP_OK) {
|
||
DEBUG_ERR("SPI", "SPI 设备添加失败: %s", esp_err_to_name(ret));
|
||
return ret;
|
||
}
|
||
|
||
DEBUG_INFO("SPI", "SPI2 总线初始化完成: MOSI=GPIO5, MISO=GPIO7, SCLK=GPIO6, CS=GPIO%d, CLK=%d Hz",
|
||
SPI_MASTER_CS_GPIO, SPI_CLOCK_HZ);
|
||
|
||
/* 配置 SPI Ready 握手引脚(GPIO10)，v2 DATA_READY 模式：仅输入。
|
||
* PB6 仅由 GD32 下拉（有数据待发时拉低，队列空时释放高）。
|
||
* ESP32 不再下拉 PB6，只检测边沿：下降沿=GD32 有数据按铃。 */
|
||
gpio_config_t ready_cfg = {};
|
||
ready_cfg.pin_bit_mask = (1ULL << SPI_READY_GPIO);
|
||
ready_cfg.mode = GPIO_MODE_INPUT; /* v2: 仅输入，不再开漏输出 */
|
||
ready_cfg.pull_up_en = GPIO_PULLUP_ENABLE;
|
||
ready_cfg.pull_down_en = GPIO_PULLDOWN_DISABLE;
|
||
ready_cfg.intr_type = GPIO_INTR_NEGEDGE; /* 仅下降沿：有数据待读 */
|
||
esp_err_t gpio_ret = gpio_config(&ready_cfg);
|
||
if (gpio_ret != ESP_OK) {
|
||
DEBUG_WARN("SPI", "SPI Ready 握手引脚 GPIO%d 配置失败: %s", SPI_READY_GPIO, esp_err_to_name(gpio_ret));
|
||
} else {
|
||
DEBUG_INFO("SPI", "DATA_READY 输入已配置: GPIO%d (← GD32 PB6，低=有数据)", SPI_READY_GPIO);
|
||
}
|
||
|
||
/* 安装 GPIO ISR 服务（全局仅安装一次）并注册边沿回调 */
|
||
static bool s_isrInstalled = false;
|
||
if (!s_isrInstalled) {
|
||
gpio_ret = gpio_install_isr_service(ESP_INTR_FLAG_IRAM);
|
||
if (gpio_ret != ESP_OK && gpio_ret != ESP_ERR_INVALID_STATE) {
|
||
DEBUG_WARN("SPI", "gpio_install_isr_service 失败: %s", esp_err_to_name(gpio_ret));
|
||
} else {
|
||
s_isrInstalled = true;
|
||
}
|
||
}
|
||
if (s_isrInstalled) {
|
||
gpio_ret = gpio_isr_handler_add((gpio_num_t)SPI_READY_GPIO,
|
||
onReadyEdgeISR, this);
|
||
if (gpio_ret != ESP_OK) {
|
||
DEBUG_WARN("SPI", "gpio_isr_handler_add GPIO%d 失败: %s",
|
||
SPI_READY_GPIO, esp_err_to_name(gpio_ret));
|
||
}
|
||
}
|
||
|
||
m_linkState.exitBusy();
|
||
m_gd32RequestPending = false;
|
||
m_localCredit = 8;
|
||
m_remoteCredit = 8;
|
||
/* v2 链路状态初始化：session 未建立，序号从 0 开始 */
|
||
m_sessionId = 0;
|
||
m_txSeq = 0;
|
||
m_lastSentSeq = 0;
|
||
m_rxAckedSeq = 0;
|
||
m_expectedRxSeq = 0;
|
||
m_gd32Role = 0;
|
||
m_v2Active = false;
|
||
m_stats = SpiLinkStats{};
|
||
m_eventHead = m_eventTail = m_eventCount = 0;
|
||
|
||
/* 创建 job 队列、事件信号量与 SPI worker（init 仍持 m_mutex） */
|
||
if (m_jobQueue == nullptr) {
|
||
m_jobQueue = xQueueCreate(kJobQueueLen, sizeof(Job *));
|
||
if (m_jobQueue == nullptr) {
|
||
DEBUG_ERR("SPI", "SPI job queue create failed");
|
||
return ESP_ERR_NO_MEM;
|
||
}
|
||
}
|
||
if (m_eventSem == nullptr) {
|
||
m_eventSem = xSemaphoreCreateCounting(kEventSlots, 0);
|
||
if (m_eventSem == nullptr) {
|
||
DEBUG_ERR("SPI", "SPI event sem create failed");
|
||
return ESP_ERR_NO_MEM;
|
||
}
|
||
}
|
||
if (m_workerTask == nullptr) {
|
||
BaseType_t ok = xTaskCreate(workerEntry, "spi_worker", TASK_STACK_SPI_WORKER, this, 6, &m_workerTask);
|
||
if (ok != pdPASS || m_workerTask == nullptr) {
|
||
DEBUG_ERR("SPI", "SPI worker task create failed");
|
||
m_workerTask = nullptr;
|
||
return ESP_ERR_NO_MEM;
|
||
}
|
||
DEBUG_INFO("SPI", "SPI worker task created");
|
||
}
|
||
m_spiTaskHandle = m_workerTask;
|
||
|
||
return ESP_OK;
|
||
}
|
||
|
||
bool SpiMaster::selfTestL0() const
|
||
{
|
||
return (m_spiDevice != nullptr) && (m_mutex != nullptr) &&
|
||
(m_workerTask != nullptr) && (m_jobQueue != nullptr);
|
||
}
|
||
|
||
bool SpiMaster::selfTestPeerL0()
|
||
{
|
||
/* 短超时、最多 2 次；不拉长整体启动 */
|
||
for (uint32_t attempt = 0U; attempt < 2U; ++attempt) {
|
||
if (hello(600U, 0U) == ESP_OK) {
|
||
return true;
|
||
}
|
||
vTaskDelay(pdMS_TO_TICKS(50));
|
||
}
|
||
return false;
|
||
}
|
||
|
||
// ============================================================
|
||
// SPI OTA 协议
|
||
// ============================================================
|
||
/**
|
||
* @brief 无锁版本的 otaTransfer（调用者须已持有锁）。
|
||
*/
|
||
esp_err_t SpiMaster::otaTransferUnlocked(uint8_t type, const uint8_t *payload, size_t payload_len,
|
||
uint8_t *resp_type, uint8_t *resp_payload,
|
||
size_t resp_max, size_t *resp_len, uint32_t timeout_ms,
|
||
bool expect_stale)
|
||
{
|
||
uint8_t tx_frame[SPI_OTA_FRAME_MAX];
|
||
size_t tx_len = 0;
|
||
if (!otaBuildFrame(type, payload, payload_len, tx_frame, &tx_len)) {
|
||
return ESP_ERR_INVALID_ARG;
|
||
}
|
||
|
||
DEBUG_DBG("SPI", "OTA TX: type=0x%02X len=%u", type, (unsigned)tx_len);
|
||
|
||
if (tx_len > SPI_OTA_FRAME_MAX) {
|
||
DEBUG_ERR("SPI", "OTA frame too large: %u", (unsigned)tx_len);
|
||
return ESP_ERR_INVALID_SIZE;
|
||
}
|
||
|
||
/* CREDIT 背压（包间节奏）：
|
||
* remoteCredit==0 禁止发新 REQUEST；等 CREDIT_UPDATE / 帧头 credit。
|
||
* HELLO / 链路控制不受 credit 限制（session 建立前 credit 可能为 0）。 */
|
||
if (type != V2_TYPE_LINK_HELLO && m_remoteCredit == 0U) {
|
||
const TickType_t cred_deadline = xTaskGetTickCount() + pdMS_TO_TICKS(
|
||
timeout_ms > 0U ? timeout_ms : 500U);
|
||
while (m_remoteCredit == 0U && xTaskGetTickCount() < cred_deadline) {
|
||
/* 有 DATA_READY 时变长读一帧（可能是 CREDIT_UPDATE 或陈旧响应） */
|
||
if (waitSpiDataReady(5U) == ESP_OK) {
|
||
uint8_t drain[SPI_OTA_FRAME_MAX];
|
||
size_t drain_len = 0U;
|
||
if (readV2FrameVarlen(drain, sizeof(drain), &drain_len, 100U) == ESP_OK) {
|
||
(void)otaFindFrame(drain, drain_len, nullptr, nullptr, nullptr, nullptr);
|
||
}
|
||
} else {
|
||
vTaskDelay(pdMS_TO_TICKS(5));
|
||
}
|
||
}
|
||
if (m_remoteCredit == 0U) {
|
||
DEBUG_WARN("SPI", "remoteCredit=0, refuse TX type=0x%02X", type);
|
||
return ESP_ERR_INVALID_STATE;
|
||
}
|
||
}
|
||
|
||
/* 同步单 CS 传输：按帧长发送；延迟一拍下本笔 RX 为陈旧响应。
|
||
* v2：PB6 低 = 有待读；陈旧响应由本笔 transferClocked 自然读走（勿额外 drain，
|
||
* 以免误吃主循环刚排好的 ACK）。CS 即互斥，TX 前不等 PB6 HIGH。 */
|
||
m_linkState.enterBusy(HandshakeState::MASTER_SENDING);
|
||
|
||
const size_t xfer_len = spiXferBytes(tx_len);
|
||
uint8_t tx_padded[SPI_OTA_FRAME_MAX];
|
||
if (tx_len > sizeof(tx_padded) || xfer_len > sizeof(tx_padded)) {
|
||
DEBUG_ERR("SPI", "OTA frame %u exceeds tx_padded %u", (unsigned)tx_len, (unsigned)sizeof(tx_padded));
|
||
m_linkState.exitBusy();
|
||
return ESP_ERR_INVALID_SIZE;
|
||
}
|
||
memset(tx_padded, 0xFF, xfer_len);
|
||
memcpy(tx_padded, tx_frame, tx_len);
|
||
|
||
uint8_t rx_raw[SPI_OTA_FRAME_MAX];
|
||
memset(rx_raw, 0xFF, xfer_len);
|
||
|
||
esp_err_t ret = transferClocked(tx_padded, xfer_len, rx_raw, xfer_len, timeout_ms);
|
||
m_linkState.exitBusy();
|
||
if (ret != ESP_OK) {
|
||
DEBUG_WARN("SPI", "OTA sync transfer failed: %s", esp_err_to_name(ret));
|
||
return ret;
|
||
}
|
||
|
||
uint8_t found_type = 0;
|
||
const uint8_t *found_payload = nullptr;
|
||
size_t found_len = 0;
|
||
size_t frame_offset = 0;
|
||
if (otaFindFrame(rx_raw, xfer_len, &found_type, &found_payload, &found_len, &frame_offset)) {
|
||
if (resp_type) *resp_type = found_type;
|
||
if (resp_payload && resp_max > 0) {
|
||
size_t copy_len = (found_len < resp_max) ? found_len : resp_max;
|
||
if (found_payload && copy_len > 0) {
|
||
memcpy(resp_payload, found_payload, copy_len);
|
||
}
|
||
}
|
||
if (resp_len) *resp_len = found_len;
|
||
/* expect_stale（两步法 step1）读到的是延迟一拍陈旧帧，序号由 poll 成功时推进。
|
||
* 此处若自增会导致 job 间隙/超时后 resend 使用错误 TX_SEQ。 */
|
||
if (!expect_stale) {
|
||
m_txSeq = (uint8_t)(m_txSeq + 1U);
|
||
}
|
||
return ESP_OK;
|
||
}
|
||
|
||
if (expect_stale) {
|
||
DEBUG_DBG("SPI", "OTA step1 stale response (expected, delayed-by-one)");
|
||
} else {
|
||
DEBUG_WARN("SPI", "OTA sync transfer response not found");
|
||
}
|
||
return ESP_ERR_INVALID_RESPONSE;
|
||
}
|
||
/**
|
||
* @brief 仅执行 SPI OTA 响应读取事务，不重复发送请求帧。
|
||
* @param resp_type 输出响应类型。
|
||
* @param resp_payload 输出响应负载缓冲区。
|
||
* @param resp_max 响应负载缓冲区最大长度。
|
||
* @param resp_len 输出实际响应长度。
|
||
* @param timeout_ms 超时时间（毫秒）。
|
||
* @return ESP_OK 表示成功，否则返回错误码。
|
||
*/
|
||
esp_err_t SpiMaster::otaPollResponse(uint8_t *resp_type, uint8_t *resp_payload,
|
||
size_t resp_max, size_t *resp_len, uint32_t timeout_ms)
|
||
{
|
||
if (!onWorker() && m_workerTask != nullptr) {
|
||
Job job{};
|
||
job.kind = JobKind::Poll;
|
||
job.timeout_ms = timeout_ms;
|
||
job.out_type = resp_type;
|
||
job.out_payload = resp_payload;
|
||
job.out_max = resp_max;
|
||
job.out_len = resp_len;
|
||
return submitJob(job);
|
||
}
|
||
LockGuard lock(m_mutex);
|
||
return otaPollResponseUnlocked(resp_type, resp_payload, resp_max, resp_len, timeout_ms);
|
||
}
|
||
|
||
/**
|
||
* @brief 无锁版本的 OTA 响应轮询实现。
|
||
* @param resp_type 输出响应类型。
|
||
* @param resp_payload 输出响应负载缓冲区。
|
||
* @param resp_max 响应负载缓冲区最大长度。
|
||
* @param resp_len 输出实际响应长度。
|
||
* @param timeout_ms 超时时间（毫秒）。
|
||
* @return ESP_OK 表示成功，否则返回错误码。
|
||
*/
|
||
esp_err_t SpiMaster::otaPollResponseUnlocked(uint8_t *resp_type, uint8_t *resp_payload,
|
||
size_t resp_max, size_t *resp_len, uint32_t timeout_ms,
|
||
uint8_t expected_type)
|
||
{
|
||
if (timeout_ms == 0U) {
|
||
timeout_ms = 1U;
|
||
}
|
||
TickType_t deadline = xTaskGetTickCount() + pdMS_TO_TICKS(timeout_ms);
|
||
uint32_t attempt = 0;
|
||
bool did_spi_read = false;
|
||
|
||
while (xTaskGetTickCount() <= deadline) {
|
||
++attempt;
|
||
|
||
/* 优先等 DATA_READY；超时仍做有限次盲 poll。
|
||
* 短 timeout（OTA 紧循环 50~150ms）必须保证至少 1 次 SPI 读，
|
||
* 否则 PB6 偶发未拉低时整段切片空转 → 只见 “timeout: 30 ms” 然后失败。 */
|
||
m_linkState.enterBusy(HandshakeState::WAITING_RESPONSE);
|
||
TickType_t now = xTaskGetTickCount();
|
||
uint32_t remain_ms = (deadline > now) ? ((deadline - now) * portTICK_PERIOD_MS) : 0U;
|
||
if (remain_ms == 0U && did_spi_read) {
|
||
break;
|
||
}
|
||
if (remain_ms == 0U) {
|
||
remain_ms = 1U; /* 强制末次读 */
|
||
}
|
||
|
||
const uint32_t ready_slice = (attempt == 1U)
|
||
? ((timeout_ms >= 80U) ? 40U : timeout_ms)
|
||
: 15U;
|
||
const uint32_t wait_ms = (ready_slice < remain_ms) ? ready_slice : remain_ms;
|
||
const bool ready = (waitSpiDataReady(wait_ms) == ESP_OK);
|
||
|
||
now = xTaskGetTickCount();
|
||
remain_ms = (deadline > now) ? ((deadline - now) * portTICK_PERIOD_MS) : 0U;
|
||
const bool last_chance = (remain_ms == 0U) || (attempt >= 6U && !did_spi_read);
|
||
/* 无 ready：前 2 轮盲读；之后每 8 轮盲读；deadline 末强制盲读一次 */
|
||
if (!ready && attempt > 2U && (attempt % 8U) != 0U && !last_chance) {
|
||
vTaskDelay(pdMS_TO_TICKS(CONFIG_DCU_OTA_POLL_BACKOFF_MS));
|
||
continue;
|
||
}
|
||
if (remain_ms == 0U) {
|
||
remain_ms = 20U; /* 末次 SPI 事务给足一点时钟时间 */
|
||
}
|
||
const uint32_t spi_timeout = (remain_ms > 200U) ? 200U : remain_ms;
|
||
|
||
uint8_t rx_raw[SPI_OTA_FRAME_MAX];
|
||
size_t rx_len = 0U;
|
||
esp_err_t ret = readV2FrameVarlen(rx_raw, sizeof(rx_raw), &rx_len, spi_timeout);
|
||
did_spi_read = true;
|
||
if (ret != ESP_OK) {
|
||
if (ret == ESP_ERR_INVALID_RESPONSE) {
|
||
vTaskDelay(pdMS_TO_TICKS(CONFIG_DCU_OTA_POLL_BACKOFF_MS));
|
||
} else {
|
||
vTaskDelay(pdMS_TO_TICKS(1));
|
||
}
|
||
if (xTaskGetTickCount() > deadline) {
|
||
break;
|
||
}
|
||
continue;
|
||
}
|
||
|
||
/* DEBUG: 限频，避免 OTA 紧循环刷屏 */
|
||
{ static uint32_t s_pdbg = 0;
|
||
if ((++s_pdbg % 40) == 1 || (rx_raw[0] != 0xFF && rx_raw[0] != 0x00)) {
|
||
v2_header_t dh; const uint8_t *dp = nullptr;
|
||
bool parsed = v2_parse_frame(rx_raw, rx_len, &dh, &dp);
|
||
if (parsed) {
|
||
DEBUG_DBG("SPI", "poll att=%u type=0x%02X ack_seq=%u lastSent=%u",
|
||
(unsigned)attempt, (unsigned)dh.type, (unsigned)dh.ack_seq,
|
||
(unsigned)m_lastSentSeq);
|
||
}
|
||
}
|
||
}
|
||
|
||
uint8_t found_type = 0;
|
||
const uint8_t *found_payload = nullptr;
|
||
size_t found_len = 0;
|
||
size_t frame_offset = 0;
|
||
|
||
if (otaFindFrame(rx_raw, rx_len, &found_type, &found_payload, &found_len, &frame_offset)) {
|
||
if (found_type == V2_TYPE_CREDIT_UPDATE) {
|
||
DEBUG_DBG("SPI", "poll got CREDIT_UPDATE credit=%u", (unsigned)m_remoteCredit);
|
||
vTaskDelay(pdMS_TO_TICKS(1));
|
||
continue;
|
||
}
|
||
|
||
if (expected_type != 0xFFU && found_type != expected_type &&
|
||
found_type != SPI_OTA_RSP_WAIT) {
|
||
DEBUG_DBG("SPI", "poll type mismatch: got=0x%02X want=0x%02X",
|
||
found_type, expected_type);
|
||
vTaskDelay(pdMS_TO_TICKS(1));
|
||
continue;
|
||
}
|
||
|
||
if (resp_type) *resp_type = found_type;
|
||
if (resp_payload && resp_max > 0) {
|
||
size_t copy_len = (found_len < resp_max) ? found_len : resp_max;
|
||
if (found_payload && copy_len > 0) {
|
||
memcpy(resp_payload, found_payload, copy_len);
|
||
} else if (copy_len > 0) {
|
||
memset(resp_payload, 0, copy_len);
|
||
}
|
||
}
|
||
if (resp_len) *resp_len = found_len;
|
||
|
||
/* WAIT 立刻返回，由 OTA 紧循环再 poll（勿在此空转） */
|
||
if (found_type == SPI_OTA_RSP_WAIT) {
|
||
m_linkState.exitBusy();
|
||
return ESP_OK;
|
||
}
|
||
if (m_lastRxAckMatched) {
|
||
m_txSeq = (uint8_t)(m_lastSentSeq + 1U);
|
||
}
|
||
m_linkState.exitBusy();
|
||
return ESP_OK;
|
||
}
|
||
|
||
vTaskDelay(pdMS_TO_TICKS(1));
|
||
}
|
||
|
||
m_linkState.exitBusy();
|
||
m_stats.ready_timeouts++;
|
||
/* 短切片超时是 OTA 正常紧循环，勿 WARN 刷爆 ring/网页 */
|
||
if (timeout_ms >= 200U) {
|
||
DEBUG_WARN("SPI", "OTA response timeout: %lu ms", (unsigned long)timeout_ms);
|
||
} else {
|
||
DEBUG_DBG("SPI", "OTA poll slice timeout: %lu ms", (unsigned long)timeout_ms);
|
||
}
|
||
return ESP_ERR_TIMEOUT;
|
||
}
|
||
|
||
/**
|
||
* @brief ESP32→GD32 发送命令 + 轮询读取真实响应（两步法，原子持锁）。
|
||
*
|
||
* 解决 GD32 "延迟一拍"协议：transact 首笔 CS 读到过期响应，
|
||
* otaPollResponse 读取本笔命令的真实响应。命令只发送一次，不重发。
|
||
* 适用于所有 ESP32→GD32 方向的命令（CAN 发送/模式切换/ID 快照等）。
|
||
*/
|
||
esp_err_t SpiMaster::transact(uint8_t type, const uint8_t *payload, size_t payload_len,
|
||
uint8_t *resp_type, uint8_t *resp_payload,
|
||
size_t resp_max, size_t *resp_len, uint32_t timeout_ms)
|
||
{
|
||
if (payload_len > SPI_OTA_FRAME_MAX) {
|
||
return ESP_ERR_INVALID_SIZE;
|
||
}
|
||
if (!onWorker() && m_workerTask != nullptr) {
|
||
Job job{};
|
||
job.kind = JobKind::Transact;
|
||
job.timeout_ms = timeout_ms;
|
||
job.type = type;
|
||
job.payload_len = payload_len;
|
||
if (payload && payload_len > 0U) {
|
||
memcpy(job.payload, payload, payload_len);
|
||
}
|
||
job.out_type = resp_type;
|
||
job.out_payload = resp_payload;
|
||
job.out_max = resp_max;
|
||
job.out_len = resp_len;
|
||
return submitJob(job);
|
||
}
|
||
return otaSendAndPoll(type, payload, payload_len,
|
||
resp_type, resp_payload, resp_max, resp_len, timeout_ms);
|
||
}
|
||
|
||
bool SpiMaster::takeEvent(uint8_t *type, uint8_t *payload, size_t max_len, size_t *len,
|
||
uint32_t timeout_ms)
|
||
{
|
||
/* 快速路径：先非阻塞尝试一次 */
|
||
{
|
||
LockGuard lock(m_mutex);
|
||
if (popEvent(type, payload, max_len, len)) {
|
||
if (m_eventSem) {
|
||
(void)xSemaphoreTake(m_eventSem, 0);
|
||
}
|
||
return true;
|
||
}
|
||
}
|
||
|
||
/* 队列空：若 timeout_ms==0 直接返回，否则在信号量上等待 */
|
||
if (timeout_ms == 0U || m_eventSem == nullptr) {
|
||
return false;
|
||
}
|
||
|
||
/* 用绝对截止时间：虚假唤醒/抢事件后按剩余时间等，避免每次重新等满 timeout。 */
|
||
const TickType_t start = xTaskGetTickCount();
|
||
const TickType_t total = pdMS_TO_TICKS(timeout_ms);
|
||
while (true) {
|
||
const TickType_t elapsed = xTaskGetTickCount() - start;
|
||
if (elapsed >= total) {
|
||
return false;
|
||
}
|
||
const TickType_t remain = total - elapsed;
|
||
if (xSemaphoreTake(m_eventSem, remain) != pdTRUE) {
|
||
return false;
|
||
}
|
||
LockGuard lock(m_mutex);
|
||
if (popEvent(type, payload, max_len, len)) {
|
||
return true;
|
||
}
|
||
/* 信号量被消费但队列空（可能被并发 takeEvent 抢走），继续等剩余时间 */
|
||
}
|
||
}
|
||
|
||
esp_err_t SpiMaster::otaSendAndPoll(uint8_t type, const uint8_t *payload, size_t payload_len,
|
||
uint8_t *resp_type, uint8_t *resp_payload,
|
||
size_t resp_max, size_t *resp_len, uint32_t timeout_ms)
|
||
{
|
||
/* 非 worker 调用：转 transact 入队，避免多任务直接碰 SPI */
|
||
if (!onWorker() && m_workerTask != nullptr) {
|
||
return transact(type, payload, payload_len,
|
||
resp_type, resp_payload, resp_max, resp_len, timeout_ms);
|
||
}
|
||
|
||
LockGuard lock(m_mutex);
|
||
|
||
/* 步骤 1: 发送命令（忽略延迟一拍的过期响应）。
|
||
* otaTransferUnlocked 可能返回:
|
||
* ESP_OK - 读到过期帧（正常，忽略）
|
||
* ESP_ERR_INVALID_RESPONSE - 读到 0xFF（正常，延迟一拍）
|
||
* 其他 - SPI 真实错误 */
|
||
/* 总超时在 send 与 poll 之间分配，二者之和不超过 timeout_ms */
|
||
uint32_t send_timeout = (timeout_ms > 500U) ? 500U : timeout_ms;
|
||
if (send_timeout == 0U) {
|
||
send_timeout = 1U;
|
||
}
|
||
uint32_t poll_timeout;
|
||
if (timeout_ms > send_timeout) {
|
||
poll_timeout = timeout_ms - send_timeout;
|
||
} else if (timeout_ms >= 40U) {
|
||
send_timeout = timeout_ms / 2U;
|
||
if (send_timeout == 0U) {
|
||
send_timeout = 1U;
|
||
}
|
||
poll_timeout = timeout_ms - send_timeout;
|
||
} else {
|
||
poll_timeout = timeout_ms;
|
||
}
|
||
if (poll_timeout == 0U) {
|
||
poll_timeout = 1U;
|
||
}
|
||
|
||
esp_err_t send_ret = otaTransferUnlocked(type, payload, payload_len,
|
||
nullptr, nullptr, 0U, nullptr, send_timeout,
|
||
/*expect_stale=*/true);
|
||
if (send_ret != ESP_OK && send_ret != ESP_ERR_INVALID_RESPONSE) {
|
||
return send_ret;
|
||
}
|
||
|
||
/* CS 释放后短延时，再 poll 应答 */
|
||
vTaskDelay(pdMS_TO_TICKS(5));
|
||
|
||
/* 步骤 2: 轮询读取真实响应（变长读，不重发命令） */
|
||
return otaPollResponseUnlocked(resp_type, resp_payload, resp_max, resp_len, poll_timeout,
|
||
/*expected_type=*/0xFFU);
|
||
}
|
||
|
||
/**
|
||
* @brief 通知 GD32 APP 设置 OTA 标志并软复位进入 Bootloader（v2 标准帧）。
|
||
* @return ESP_OK 表示成功，否则返回错误码。
|
||
*/
|
||
esp_err_t SpiMaster::appRequestBootloader()
|
||
{
|
||
if (!onWorker() && m_workerTask != nullptr) {
|
||
Job job{};
|
||
job.kind = JobKind::EnterBoot;
|
||
job.timeout_ms = 5000U;
|
||
return submitJob(job);
|
||
}
|
||
|
||
LockGuard lock(m_mutex);
|
||
DEBUG_INFO("SPI", "请求 GD32 APP 进入 Bootloader (v2)...");
|
||
|
||
m_gd32RequestPending = false;
|
||
|
||
/* 先变长读最多 2 次，吞掉残留 0xC1（仅 DATA_READY 低时读，禁止固定长度盲读）。 */
|
||
for (uint32_t d = 0U; d < 2U; ++d) {
|
||
if (waitSpiDataReady(5U) != ESP_OK) {
|
||
break;
|
||
}
|
||
uint8_t rx_raw[SPI_OTA_FRAME_MAX];
|
||
size_t rx_len = 0U;
|
||
m_linkState.enterBusy(HandshakeState::WAITING_RESPONSE);
|
||
(void)readV2FrameVarlen(rx_raw, sizeof(rx_raw), &rx_len, 20U);
|
||
m_linkState.exitBusy();
|
||
vTaskDelay((pdMS_TO_TICKS(5) > 0) ? pdMS_TO_TICKS(5) : 1);
|
||
}
|
||
|
||
/* 最多 3 次 0xB0。只认 type=0xB0 + status=0xB5 为真 ACK。
|
||
* 勿把 session=0 的 0x80 当成功（常见为过期/错帧，导致“假 ack、真没进 BOOT”）。 */
|
||
constexpr uint32_t kMaxSends = 3U;
|
||
bool command_sent = false;
|
||
bool got_ack = false;
|
||
const TickType_t gap = (pdMS_TO_TICKS(10) > 0) ? pdMS_TO_TICKS(10) : 1;
|
||
|
||
for (uint32_t retry = 0U; retry < kMaxSends; ++retry) {
|
||
if (retry > 0U) {
|
||
vTaskDelay(pdMS_TO_TICKS(2));
|
||
/* 序号/会话错乱时重同步一次再发 0xB0 */
|
||
if (retry == 1U) {
|
||
m_v2Active = false;
|
||
m_sessionId = esp_random() | 0x00000001U;
|
||
m_txSeq = 0;
|
||
m_lastSentSeq = 0;
|
||
m_rxAckedSeq = 0;
|
||
m_expectedRxSeq = 0;
|
||
uint8_t hf[V2_MAX_FRAME];
|
||
size_t hl = 0;
|
||
if (v2_build_hello_frame(m_sessionId, V2_ROLE_APP, hf, &hl)) {
|
||
/* 延迟一拍：连发 2 次 HELLO（≥64B 时钟），第 2 次 RX 为 ACK */
|
||
const size_t xlen = spiXferBytes(hl);
|
||
for (uint32_t hi = 0U; hi < 2U; ++hi) {
|
||
uint8_t tx_p[SPI_OTA_FRAME_MAX];
|
||
uint8_t rx_r[SPI_OTA_FRAME_MAX];
|
||
memset(tx_p, 0xFF, xlen);
|
||
memcpy(tx_p, hf, hl);
|
||
memset(rx_r, 0xFF, xlen);
|
||
m_linkState.enterBusy(HandshakeState::MASTER_SENDING);
|
||
(void)transferClocked(tx_p, xlen, rx_r, xlen, 200U);
|
||
m_linkState.exitBusy();
|
||
v2_header_t h;
|
||
const uint8_t *pl = nullptr;
|
||
if (v2_parse_frame(rx_r, xlen, &h, &pl) &&
|
||
h.type == V2_TYPE_LINK_HELLO && (h.flags & V2_FLAG_RESPONSE) &&
|
||
pl && h.payload_len >= 6U &&
|
||
v2_get_u32le(&pl[0]) == m_sessionId) {
|
||
m_gd32Role = pl[4];
|
||
m_v2Active = true;
|
||
DEBUG_INFO("SPI", "ENTER_BOOT 前 HELLO 重同步 ok role=%u", m_gd32Role);
|
||
break;
|
||
}
|
||
vTaskDelay(gap);
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
esp_err_t ret = otaTransferUnlocked(SPI_APP_ENTER_BOOT_CMD, nullptr, 0U,
|
||
nullptr, nullptr, 0U, nullptr, 400U,
|
||
/*expect_stale=*/true);
|
||
if (ret != ESP_OK && ret != ESP_ERR_INVALID_RESPONSE) {
|
||
DEBUG_WARN("SPI", "ENTER_BOOT transfer failed: %s", esp_err_to_name(ret));
|
||
continue;
|
||
}
|
||
command_sent = true;
|
||
m_txSeq = (uint8_t)(m_lastSentSeq + 1U);
|
||
vTaskDelay(gap);
|
||
|
||
/* poll 最多 ~200ms：只认 0xB0+0xB5。优先 DATA_READY，超时仍单 CS 盲读。 */
|
||
const TickType_t deadline = xTaskGetTickCount() + pdMS_TO_TICKS(200U);
|
||
uint8_t last_type = 0xFFU;
|
||
uint32_t poll_i = 0U;
|
||
while (xTaskGetTickCount() <= deadline) {
|
||
++poll_i;
|
||
m_linkState.enterBusy(HandshakeState::WAITING_RESPONSE);
|
||
(void)waitSpiDataReady(poll_i <= 2U ? 20U : 5U);
|
||
|
||
uint8_t rx_raw[SPI_OTA_FRAME_MAX];
|
||
size_t rx_len = 0U;
|
||
ret = readV2FrameVarlen(rx_raw, sizeof(rx_raw), &rx_len, 40U);
|
||
m_linkState.exitBusy();
|
||
if (ret != ESP_OK) {
|
||
vTaskDelay(gap);
|
||
continue;
|
||
}
|
||
|
||
v2_header_t hdr;
|
||
const uint8_t *pload = nullptr;
|
||
if (!v2_parse_frame(rx_raw, rx_len, &hdr, &pload) ||
|
||
!(hdr.flags & V2_FLAG_RESPONSE)) {
|
||
vTaskDelay(gap);
|
||
continue;
|
||
}
|
||
last_type = hdr.type;
|
||
|
||
if (hdr.type == SPI_APP_ENTER_BOOT_CMD) {
|
||
const uint8_t status = (hdr.payload_len > 0U && pload)
|
||
? pload[0] : 0x00U;
|
||
if (status == SPI_APP_ENTER_BOOT_ACK_OK) {
|
||
DEBUG_INFO("SPI", "ENTER_BOOT ACK type=0xB0 status=0xB5 sess=0x%08lX",
|
||
(unsigned long)hdr.session_id);
|
||
got_ack = true;
|
||
break;
|
||
}
|
||
DEBUG_WARN("SPI", "ENTER_BOOT ACK status=0x%02X (want 0xB5)", status);
|
||
} else if (hdr.type == V2_TYPE_LINK_ERROR) {
|
||
const uint8_t errc = (hdr.payload_len > 0U && pload) ? pload[0] : 0xFFU;
|
||
const uint8_t exp = (hdr.payload_len > 1U && pload) ? pload[1] : 0xFFU;
|
||
DEBUG_WARN("SPI", "ENTER_BOOT 被拒 LINK_ERROR code=0x%02X expected_seq=%u last_sent=%u",
|
||
errc, exp, (unsigned)m_lastSentSeq);
|
||
break;
|
||
} else if (hdr.type == SPI_OTA_RSP_ERROR) {
|
||
DEBUG_WARN("SPI", "ENTER_BOOT 收到 RSP_ERROR(0x82)，将重发");
|
||
break;
|
||
} else {
|
||
/* 0xC1 事件 / 过期 0x80 等：继续 poll，不记成功 */
|
||
DEBUG_DBG("SPI", "ENTER_BOOT poll 忽略 type=0x%02X flags=0x%02X",
|
||
hdr.type, hdr.flags);
|
||
}
|
||
vTaskDelay(gap);
|
||
}
|
||
|
||
if (got_ack) {
|
||
break;
|
||
}
|
||
if (last_type != 0xFFU) {
|
||
DEBUG_INFO("SPI", "ENTER_BOOT poll 结束 last_type=0x%02X (未获 0xB0/0xB5)", last_type);
|
||
}
|
||
}
|
||
|
||
if (command_sent) {
|
||
/* 静默：APP 擦配置页(可达数十 ms) + 软复位 + BOOT 起机。
|
||
* 此间禁止 HELLO，否则 role 会一直像卡在 APP。 */
|
||
const uint32_t kQuietMs = got_ack ? 100U : 30U;
|
||
DEBUG_INFO("SPI", "ENTER_BOOT 已上总线 (ack=%s)，静默 %lums 等待 APP 复位...",
|
||
got_ack ? "yes" : "no", (unsigned long)kQuietMs);
|
||
vTaskDelay(pdMS_TO_TICKS(kQuietMs));
|
||
return got_ack ? ESP_OK : ESP_ERR_INVALID_RESPONSE;
|
||
}
|
||
DEBUG_WARN("SPI", "ENTER_BOOT 未能发出 SPI 帧");
|
||
return ESP_ERR_TIMEOUT;
|
||
}
|
||
|
||
/**
|
||
* @brief 通过 HELLO 轮询等待 Bootloader 就绪（v2 方式）。
|
||
*
|
||
* App→Boot 切换后轮询 HELLO，直到 role=boot 或超时。
|
||
* APP 仍在线时拉大间隔、降噪日志，避免 role=1 刷屏。
|
||
*/
|
||
esp_err_t SpiMaster::waitForBootloaderReady(uint32_t timeout_ms)
|
||
{
|
||
if (!onWorker() && m_workerTask != nullptr) {
|
||
Job job{};
|
||
job.kind = JobKind::WaitBoot;
|
||
job.timeout_ms = timeout_ms;
|
||
return submitJob(job);
|
||
}
|
||
|
||
DEBUG_INFO("SPI", "等待 Bootloader 就绪 (HELLO 轮询, timeout=%lums)...",
|
||
(unsigned long)timeout_ms);
|
||
|
||
/* 复位/起机再留白；未走 appRequestBootloader 的调用方也需要 */
|
||
{
|
||
const TickType_t settle = (pdMS_TO_TICKS(200) > 0) ? pdMS_TO_TICKS(200) : 1;
|
||
vTaskDelay(settle);
|
||
}
|
||
|
||
const TickType_t deadline = xTaskGetTickCount() + pdMS_TO_TICKS(timeout_ms);
|
||
constexpr uint32_t kHelloAttemptMs = 400U;
|
||
uint32_t app_hits = 0U;
|
||
uint32_t rounds = 0U;
|
||
|
||
while (xTaskGetTickCount() < deadline) {
|
||
TickType_t now = xTaskGetTickCount();
|
||
uint32_t remain_ms = (deadline > now)
|
||
? (uint32_t)((deadline - now) * portTICK_PERIOD_MS) : 0U;
|
||
if (remain_ms == 0U) {
|
||
break;
|
||
}
|
||
const uint32_t attempt_ms = (remain_ms < kHelloAttemptMs) ? remain_ms : kHelloAttemptMs;
|
||
++rounds;
|
||
|
||
esp_err_t ret = hello(attempt_ms, V2_ROLE_BOOT);
|
||
if (ret == ESP_OK && m_gd32Role == V2_ROLE_BOOT) {
|
||
DEBUG_INFO("SPI", "Bootloader 就绪 (HELLO role=boot, round=%lu)",
|
||
(unsigned long)rounds);
|
||
return ESP_OK;
|
||
}
|
||
|
||
if (ret == ESP_OK && m_gd32Role == V2_ROLE_APP) {
|
||
++app_hits;
|
||
/* 仍在 APP：复位未完成或 ENTER_BOOT 未生效；放慢 HELLO 给 Flash/复位时间 */
|
||
if (app_hits == 1U || (app_hits % 5U) == 0U) {
|
||
DEBUG_INFO("SPI", "仍为 APP (role=1)，等待复位进 BOOT... (app_hits=%lu)",
|
||
(unsigned long)app_hits);
|
||
}
|
||
const uint32_t app_gap_ms = (app_hits < 3U) ? 200U : 150U;
|
||
const TickType_t app_gap = (pdMS_TO_TICKS(app_gap_ms) > 0)
|
||
? pdMS_TO_TICKS(app_gap_ms) : 1;
|
||
vTaskDelay(app_gap);
|
||
continue;
|
||
}
|
||
|
||
/* 无响应 / 0xC1 噪声：中等等待 */
|
||
const TickType_t miss_gap = (pdMS_TO_TICKS(60) > 0) ? pdMS_TO_TICKS(60) : 1;
|
||
vTaskDelay(miss_gap);
|
||
}
|
||
|
||
DEBUG_WARN("SPI", "Bootloader 就绪超时 (%lums, rounds=%lu, app_hits=%lu)",
|
||
(unsigned long)timeout_ms, (unsigned long)rounds, (unsigned long)app_hits);
|
||
return ESP_ERR_TIMEOUT;
|
||
}
|
||
|
||
/**
|
||
* @brief 向 GD32 APP 发送存活探测（帧长发送 + DATA_READY 变长读）。
|
||
*
|
||
* 两步法（持锁）：otaTransferUnlocked(expect_stale) + otaPollResponseUnlocked。
|
||
* GD32 App PING 响应 type=kRspAck(0x80)，
|
||
* payload 16B = APP ver(4) + BOOT ver(4) + uptime_ms(4) + build_hash(4)。
|
||
*/
|
||
esp_err_t SpiMaster::appPing(uint32_t timeout_ms, uint32_t *uptime_sec, gd32_version_t *version)
|
||
{
|
||
if (!onWorker() && m_workerTask != nullptr) {
|
||
Job job{};
|
||
job.kind = JobKind::Ping;
|
||
job.timeout_ms = timeout_ms;
|
||
job.out_uptime = uptime_sec;
|
||
job.out_version = version;
|
||
return submitJob(job);
|
||
}
|
||
|
||
LockGuard lock(m_mutex);
|
||
constexpr uint8_t kAppPingType = 0xA1U;
|
||
|
||
uint8_t resp_type = 0;
|
||
uint8_t resp_payload[32];
|
||
size_t resp_len = 0U;
|
||
|
||
/* PING 无 payload，send 只发 1 帧 SPI（<50ms），不需要 500ms 预留。
|
||
* 省下的时间给 poll，让 APP 命令层有更长窗口响应。 */
|
||
const uint32_t send_timeout = (timeout_ms > 100U) ? 100U : timeout_ms;
|
||
esp_err_t send_ret = otaTransferUnlocked(kAppPingType, nullptr, 0U,
|
||
nullptr, nullptr, 0U, nullptr, send_timeout,
|
||
/*expect_stale=*/true);
|
||
if (send_ret != ESP_OK && send_ret != ESP_ERR_INVALID_RESPONSE) {
|
||
DEBUG_DBG("SPI", "APP PING send failed: %s", esp_err_to_name(send_ret));
|
||
return send_ret;
|
||
}
|
||
|
||
{
|
||
const TickType_t gap = (pdMS_TO_TICKS(1) > 0) ? pdMS_TO_TICKS(1) : 1;
|
||
vTaskDelay(gap);
|
||
}
|
||
|
||
const uint32_t poll_timeout = (timeout_ms > send_timeout)
|
||
? (timeout_ms - send_timeout) : 500U;
|
||
esp_err_t err = otaPollResponseUnlocked(&resp_type, resp_payload, sizeof(resp_payload),
|
||
&resp_len, poll_timeout, SPI_OTA_RSP_ACK);
|
||
if (err != ESP_OK) {
|
||
DEBUG_DBG("SPI", "APP PING poll failed: %s", esp_err_to_name(err));
|
||
return err;
|
||
}
|
||
|
||
if (resp_type != SPI_OTA_RSP_ACK || resp_len < 12U) {
|
||
DEBUG_DBG("SPI", "APP PING bad resp type=0x%02X len=%u", resp_type, (unsigned)resp_len);
|
||
return ESP_ERR_INVALID_RESPONSE;
|
||
}
|
||
|
||
const uint8_t *pload = resp_payload;
|
||
if (version) {
|
||
memset(version, 0, sizeof(gd32_version_t));
|
||
version->app_major = pload[0];
|
||
version->app_minor = pload[1];
|
||
version->app_patch = pload[2];
|
||
version->app_build = pload[3];
|
||
if (resp_len >= 16U) {
|
||
version->boot_major = pload[4];
|
||
version->boot_minor = pload[5];
|
||
version->boot_patch = pload[6];
|
||
version->boot_build = pload[7];
|
||
}
|
||
}
|
||
if (uptime_sec) {
|
||
const uint8_t *ut = (resp_len >= 16U) ? &pload[8] : &pload[4];
|
||
const uint32_t uptime_ms = (uint32_t)ut[0]
|
||
| ((uint32_t)ut[1] << 8)
|
||
| ((uint32_t)ut[2] << 16)
|
||
| ((uint32_t)ut[3] << 24);
|
||
*uptime_sec = uptime_ms / 1000U;
|
||
}
|
||
DEBUG_DBG("SPI", "APP PING v2 成功");
|
||
return ESP_OK;
|
||
}
|
||
|
||
// ============================================================
|
||
// SPI Link v2 链路状态
|
||
// ============================================================
|
||
SpiMaster::SpiLinkStats SpiMaster::linkStats()
|
||
{
|
||
/* OTA 中继期间 SPI worker 在 otaSendAndPoll 全程持有 m_mutex（发送+轮询 ACK，
|
||
* 每包最长 6s）。若用 portMAX_DELAY 等锁，/system/status 会被阻塞整个传输阶段，
|
||
* 前端进度完全不同步直到传输结束。
|
||
* 统计仅为展示用途，拿不到锁时返回零值，绝不阻塞 status handler。 */
|
||
SpiLinkStats ret{};
|
||
if (m_mutex && xSemaphoreTake(m_mutex, pdMS_TO_TICKS(5)) == pdTRUE) {
|
||
ret = m_stats;
|
||
xSemaphoreGive(m_mutex);
|
||
}
|
||
return ret;
|
||
}
|
||
|
||
SpiMaster::SpiLinkStatus SpiMaster::linkStatus()
|
||
{
|
||
/* 状态字段为 volatile 单字节/双字读，原子性足够；统计复用 linkStats() 的有界取锁。 */
|
||
SpiLinkStatus st{};
|
||
st.version = 2U;
|
||
st.gd32_role = m_gd32Role;
|
||
st.session_id = m_sessionId;
|
||
st.local_credit = m_localCredit;
|
||
st.remote_credit = m_remoteCredit;
|
||
st.stats = linkStats();
|
||
return st;
|
||
}
|
||
|
||
esp_err_t SpiMaster::hello(uint32_t timeout_ms, uint8_t role_hint)
|
||
{
|
||
if (!onWorker() && m_workerTask != nullptr) {
|
||
Job job{};
|
||
job.kind = JobKind::Hello;
|
||
job.timeout_ms = timeout_ms;
|
||
job.role_hint = role_hint;
|
||
return submitJob(job);
|
||
}
|
||
|
||
LockGuard lock(m_mutex);
|
||
|
||
/* 1. 生成随机非零 SESSION_ID（整次 hello 内固定，禁止每 CS 换 session） */
|
||
m_sessionId = esp_random() | 0x00000001U;
|
||
m_txSeq = 0;
|
||
m_lastSentSeq = 0;
|
||
m_rxAckedSeq = 0;
|
||
m_expectedRxSeq = 0;
|
||
m_gd32Role = 0;
|
||
m_v2Active = false;
|
||
|
||
/* 2. 构建 HELLO 帧 */
|
||
uint8_t hello_frame[V2_MAX_FRAME];
|
||
size_t hello_len = 0;
|
||
if (!v2_build_hello_frame(m_sessionId, role_hint, hello_frame, &hello_len)) {
|
||
DEBUG_ERR("SPI", "HELLO build failed");
|
||
return ESP_ERR_INVALID_RESPONSE;
|
||
}
|
||
|
||
/* HELLO 必须走延迟一拍全双工连发（与 Boot 实测一致）：
|
||
* 第 N 次 CS 读到第 N-1 次 HELLO 的 ACK。不可只等 DATA_READY 再短读：
|
||
* Boot TX 按 128 预装，过短/两段 CS 会清 pending → MISO 全 0xFF。 */
|
||
const TickType_t deadline = xTaskGetTickCount() + pdMS_TO_TICKS(timeout_ms);
|
||
uint8_t rx_raw[SPI_OTA_FRAME_MAX];
|
||
uint32_t attempt = 0U;
|
||
uint8_t last_type = 0xFFU;
|
||
uint8_t last_flags = 0U;
|
||
bool saw_any_frame = false;
|
||
uint8_t last_rx_head[16];
|
||
memset(last_rx_head, 0xFF, sizeof(last_rx_head));
|
||
|
||
const TickType_t gap_ticks = (pdMS_TO_TICKS(10) > 0) ? pdMS_TO_TICKS(10) : 1;
|
||
const size_t xfer_len = spiXferBytes(hello_len); /* ≥64，盖住 HELLO_ACK */
|
||
|
||
while (xTaskGetTickCount() <= deadline) {
|
||
++attempt;
|
||
|
||
m_linkState.enterBusy(HandshakeState::MASTER_SENDING);
|
||
|
||
uint8_t tx_padded[SPI_OTA_FRAME_MAX];
|
||
memset(tx_padded, 0xFF, xfer_len);
|
||
memcpy(tx_padded, hello_frame, hello_len);
|
||
|
||
memset(rx_raw, 0xFF, xfer_len);
|
||
esp_err_t ret = transferClocked(tx_padded, xfer_len, rx_raw, xfer_len, 200U);
|
||
m_linkState.exitBusy();
|
||
if (ret != ESP_OK) {
|
||
DEBUG_WARN("SPI", "HELLO transfer failed[%lu]: %s",
|
||
(unsigned long)attempt, esp_err_to_name(ret));
|
||
vTaskDelay(gap_ticks);
|
||
continue;
|
||
}
|
||
|
||
memcpy(last_rx_head, rx_raw, sizeof(last_rx_head));
|
||
|
||
v2_header_t hdr;
|
||
const uint8_t *pload = nullptr;
|
||
if (!v2_parse_frame(rx_raw, xfer_len, &hdr, &pload)) {
|
||
vTaskDelay(gap_ticks);
|
||
continue;
|
||
}
|
||
saw_any_frame = true;
|
||
last_type = hdr.type;
|
||
last_flags = hdr.flags;
|
||
|
||
if (hdr.type != V2_TYPE_LINK_HELLO || !(hdr.flags & V2_FLAG_RESPONSE)) {
|
||
vTaskDelay(gap_ticks);
|
||
continue;
|
||
}
|
||
if (hdr.payload_len < 6U || !pload) {
|
||
vTaskDelay(gap_ticks);
|
||
continue;
|
||
}
|
||
|
||
const uint32_t session_echo = v2_get_u32le(&pload[0]);
|
||
if (session_echo != m_sessionId) {
|
||
/* 延迟一拍旧 ACK：同 session 再发一次即可对齐 */
|
||
DEBUG_DBG("SPI", "HELLO lag echo=0x%08lX expected=0x%08lX attempt=%lu",
|
||
(unsigned long)session_echo, (unsigned long)m_sessionId,
|
||
(unsigned long)attempt);
|
||
vTaskDelay(gap_ticks);
|
||
continue;
|
||
}
|
||
|
||
m_gd32Role = pload[4];
|
||
/* payload[5]/hdr.credit 均为对端 credit_max → 写入 m_remoteCredit。
|
||
* 勿写入 m_localCredit（本端 RX 窗口，init 为 8）。 */
|
||
m_remoteCredit = (pload[5] != 0U) ? pload[5] : hdr.credit;
|
||
m_v2Active = true;
|
||
m_stats.resyncs++;
|
||
return ESP_OK;
|
||
}
|
||
|
||
if (!saw_any_frame) {
|
||
DEBUG_WARN("SPI",
|
||
"HELLO: no valid v2 frame in response (attempts=%lu) rx[0..15]="
|
||
"%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X",
|
||
(unsigned long)attempt,
|
||
last_rx_head[0], last_rx_head[1], last_rx_head[2], last_rx_head[3],
|
||
last_rx_head[4], last_rx_head[5], last_rx_head[6], last_rx_head[7],
|
||
last_rx_head[8], last_rx_head[9], last_rx_head[10], last_rx_head[11],
|
||
last_rx_head[12], last_rx_head[13], last_rx_head[14], last_rx_head[15]);
|
||
} else {
|
||
DEBUG_WARN("SPI", "HELLO: bad/lag response type=0x%02X flags=0x%02X attempts=%lu",
|
||
last_type, last_flags, (unsigned long)attempt);
|
||
}
|
||
return ESP_ERR_INVALID_RESPONSE;
|
||
}
|
||
|